Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 engine swap, petrol to diesel
Moderators: toaddog, Elmo, DUDELUX
60 engine swap, petrol to diesel
A mate is looking at getting rid of the petrol in his 60. V8 diesel is the way I'd go but its out of the question, so how would a 1hz go, anyone tried it?
Re: 60 engine swap, petrol to diesel
There has been talk of this before, but I have no idea who or where these topics are now.shanegtr wrote:A mate is looking at getting rid of the petrol in his 60. V8 diesel is the way I'd go but its out of the question, so how would a 1hz go, anyone tried it?
Try the "Toyota Bible" at the top of this forum... you might find something in there under the "Engine" section.
Also some other good info in there on 60's.
When in doubt..... UTE-ERIZE it!!!
theres a dude that did it in america, its on the pir8 forum.
some things to note is that the fuel and exhaust are on the opposite side of the engine compared to the 2H
otherwise there isnt any real problem. you will have to try and get a bellhousing to fit. I think they come from a 75 or 79 series if you plan on using your current gearbox.
1HZ is pretty much a mechanical engine, only things you need to worry about electrically is the glow system, EDIC system, and sensors.
The glow system could probably be driven by the 2H glow system, or by your own wiring (10 second timer?).
I have no idea what the EDIC system, on a 1HZ is like or if they even have one. I assume they do so you will need to get it with the motor. There will be some electronic parts required to get this working.
Sensors from a 2H or 2F should screw straight into the 1hz block perhaps with some cutting/extending wires which will make use of all your current guages etc.
It should be a good swap. 1HZ's are pretty cheap and give out HZ has about 100kw which is similar to the 12HT although the 12HT probably comes on power sooner. You can then turbo it and get some good power going. Best part is all your parts are still toyota!
some things to note is that the fuel and exhaust are on the opposite side of the engine compared to the 2H
otherwise there isnt any real problem. you will have to try and get a bellhousing to fit. I think they come from a 75 or 79 series if you plan on using your current gearbox.
1HZ is pretty much a mechanical engine, only things you need to worry about electrically is the glow system, EDIC system, and sensors.
The glow system could probably be driven by the 2H glow system, or by your own wiring (10 second timer?).
I have no idea what the EDIC system, on a 1HZ is like or if they even have one. I assume they do so you will need to get it with the motor. There will be some electronic parts required to get this working.
Sensors from a 2H or 2F should screw straight into the 1hz block perhaps with some cutting/extending wires which will make use of all your current guages etc.
It should be a good swap. 1HZ's are pretty cheap and give out HZ has about 100kw which is similar to the 12HT although the 12HT probably comes on power sooner. You can then turbo it and get some good power going. Best part is all your parts are still toyota!
I know the HJ60's came out with 4.11 diff ratios as standard... not too sure what the FJ60's were though, but that gives you something to check against.shanegtr wrote:The engine swap seems easy enough. Exhaust shouldnt be to much of a drama as he wants to whack a turbo on it anyway. Is there any diference in the petrol to diesel diff ratio's? Could we get away with the petrol ratios with a 1hz?
hope that helps a little.
When in doubt..... UTE-ERIZE it!!!
Who is online
Users browsing this forum: No registered users and 2 guests