Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bent IFS hangers.....BLOODY IFS!!!

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 217
Joined: Thu Jan 13, 2005 12:01 pm
Location: East BrisVegas

Bent IFS hangers.....BLOODY IFS!!!

Post by V6XtraHilux »

hey guys,
i found out that after a recent trip into the bush, that somewhere somehow ive wacked the lower left front wishbone support, near the pivot bolt and dial used for alignement.

the knock has actually bent the support about half an inch backwards!! Again...BLOODY IFS!!! and NO replies telling me to do a SAS either, unless u wanna shout the SAS urself!

my question is: does anybody recommend somebody (or a shop) in Sydney, preffereably not western suburbs, to be able to straighten this support, so the suspension works like new?

I dont trust myself with the oxy, hence I wanna get it done professionally!

Thanks.
Karl (unimpressed IFS driver) :twisted:
Posts: 23
Joined: Sun Jul 17, 2005 6:15 am
Location: Central Coast Erina

Bent hanger

Post by Fathilux »

Karl, I bent mine back 1" 3/4" on both side on one rock up on slippery rock road, yes everyone knows the rock I'm talking about. Anyway you might have to bite the bullet and convert over to a live front end. If you choose to go this way see overkill engineering at hornsby.


cheers Fathilux
Cheers Fathilux,

Gravity becomes heavier when you add Consequence , Brisbane Waters 4wd Club
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

any reason why not in the west sydney

if u dont mind going there i can sugest motorcare at prospect

they repaired a crack in my dads chassis and rewelded a mount

you can contact them on 02 98963782 or 02 96881553

unit 4/12rowood road prospect
Posts: 217
Joined: Thu Jan 13, 2005 12:01 pm
Location: East BrisVegas

Post by V6XtraHilux »

I preferred not Western Sydney cos I live on the northern beaches and work currently is based in surry hills, so to drop the thruck off and get to work, then get back to truck, pick up, would be an absolute pain in the butt.

But (butt??!) I appreciate the feedback, if im seriously stuck and cant find someone local, then I'll give them a call.

Thanks again Zukin4life
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

V6XtraHilux wrote:I preferred not Western Sydney cos I live on the northern beaches and work currently is based in surry hills, so to drop the thruck off and get to work, then get back to truck, pick up, would be an absolute pain in the butt.

But (butt??!) I appreciate the feedback, if im seriously stuck and cant find someone local, then I'll give them a call.

Thanks again Zukin4life
Yeh overkill at horsby, u northshore scum. :finger:
\m/
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests