can the camshaft bearings in the 4.6 block be renewed?
My book only goes to 4.0 and says no !
Brian
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.6 camshaft?
Moderator: Micka
G`day Brian , if it`s only out of interest seems they can .
If your after a set , the part number is STC 1961 .
Possibly a 3.5 or 3.9 set would fit but don`t know . Do know if using the earlier timing cover etc that an ordinary 3.5 cam will fit all Rover V8s also the P76 .
So the inside dia of the bearings are the same only the outer dia would need measuring .
What book is it that says they can`t be replaced ?
I have read this myself somewhere but don`t remember where .
I haven`t tried to get the bearings myself but do know they exist .
All the best , peter .
If your after a set , the part number is STC 1961 .
Possibly a 3.5 or 3.9 set would fit but don`t know . Do know if using the earlier timing cover etc that an ordinary 3.5 cam will fit all Rover V8s also the P76 .
So the inside dia of the bearings are the same only the outer dia would need measuring .
What book is it that says they can`t be replaced ?
I have read this myself somewhere but don`t remember where .
I haven`t tried to get the bearings myself but do know they exist .
All the best , peter .
Who is online
Users browsing this forum: No registered users and 0 guests