Is there anyway to fit disks to the rear of an MQ/MK ???, has anyone here done it or heard of it being done? and what would be involved,
Cheers
Hoppy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ/MK Disk brake rear??
info for what you want is hear
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=45767
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=45767
Its not cool, unless it's got boost :)
Yeh peter did a very good job on his conversion. it is a simple conversion ill get to it one day..... but the only reason i havent done it is if i start breaking huge amounts of diff internals its diff swap time rather tahn disk brake rear... 
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
disc rear
Yep real easy!! But I think I may have got lucky with my combination. I didnt have to do anything with my master cyl and the rear bias is spot on. Its been in now for a couple of months and I drive 40 kays to and from work every day with lots of steep up and down hill. Absolutely no problems or over heating. See how it was done in MEMBERS Frankenstine (still modding) I think I have a profile of the caliper mounting bkt somewhere
You do not have the required permissions to view the files attached to this post.
Remember some days your the pigeon and other days your the statue
pics
All in membersHoppy11 wrote:any more pics and info that you have would be great
Remember some days your the pigeon and other days your the statue
info and pics are in the above post by MarkMARKx4 wrote:info for what you want is hear
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=45767
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Re: disc rear
is it possible to use the rotor and caliper of the front brakes. cuz i have a spare set of front rotors and calipers.DR Frankenstine wrote:Yep real easy!! But I think I may have got lucky with my combination. I didnt have to do anything with my master cyl and the rear bias is spot on. Its been in now for a couple of months and I drive 40 kays to and from work every day with lots of steep up and down hill. Absolutely no problems or over heating. See how it was done in MEMBERS Frankenstine (still modding) I think I have a profile of the caliper mounting bkt somewhere
discs
NO!!
The caliper piston is to big.. You will have a very poor pedal and to much messing around getting bias right. you would end up having to change it anyway so don't go there
The caliper piston is to big.. You will have a very poor pedal and to much messing around getting bias right. you would end up having to change it anyway so don't go there
Remember some days your the pigeon and other days your the statue
It's all good, I have bought all the mechanicals from a VX commodore, motor, auto, all wiring computer, exhaust, everything i need for the patrol, so they chucked the rear disks and calipers in with the deal, so we will get them fitted up, would it be possible to make up the backing, plate that you cut from the old backing plate to include the caliper braket, so then the caliper bracket wont have to be welded to the diff, thus eliminating the engineerings report???
Cheers
Hoppy
Cheers
Hoppy
Re: discs
thank frankenstine. would the rear breake set of the GQ be bolt on?DR Frankenstine wrote:NO!!
The caliper piston is to big.. You will have a very poor pedal and to much messing around getting bias right. you would end up having to change it anyway so don't go there
Re: discs
nopeMintoy wrote:thank frankenstine. would the rear breake set of the GQ be bolt on?DR Frankenstine wrote:NO!!
The caliper piston is to big.. You will have a very poor pedal and to much messing around getting bias right. you would end up having to change it anyway so don't go there
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
backing plate
I would say no. I would think the material would be to thin. The backing plate is prolly 3 or 4mm and the material I used was 10mm.Hoppy11 wrote:It's all good, I have bought all the mechanicals from a VX commodore, motor, auto, all wiring computer, exhaust, everything i need for the patrol, so they chucked the rear disks and calipers in with the deal, so we will get them fitted up, would it be possible to make up the backing, plate that you cut from the old backing plate to include the caliper braket, so then the caliper bracket wont have to be welded to the diff, thus eliminating the engineerings report???
Cheers
Hoppy
Remember some days your the pigeon and other days your the statue
handbrake
Not 100% sure but I would think no..scout392 wrote:can you get a hand brake set up on the rear disks or drums.
On any H260 that is
Eric
Go the tailshaft mounted disc handbrake using a cable activated boat disc brake caliper.
Remember some days your the pigeon and other days your the statue
Re: handbrake
i might have look at thatDR Frankenstine wrote:Not 100% sure but I would think no..scout392 wrote:can you get a hand brake set up on the rear disks or drums.
On any H260 that is
Eric
Go the tailshaft mounted disc handbrake using a cable activated boat disc brake caliper.
cheers
eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
backing plate
The backing plate and shims set the bearing pre-load 10mm would be to thick and you would have to much bearing slop. Why not put longer stubs on the hub and then when the hub bolts on you would have enough length on the inner side to bolt a manufactured caliper mounting plate.Hoppy11 wrote:What if I make a backing plate from 10mm which includes the bracket, or would a 10 mm baking plate be too thick??
Hoppy
Remember some days your the pigeon and other days your the statue
Who is online
Users browsing this forum: No registered users and 28 guests