Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Changing bundy clutch

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 17
Joined: Thu Sep 02, 2004 9:43 am
Location: Vic

Changing bundy clutch

Post by Turbo 42 »

i am about to change the clutch on my LJ70 bundera

is there anything i should no before i start?

it has a push button HI range 4X4, i dont think it should be a problem
but if anyone has any advice that would be great.

cheers

Leigh
Toyota Bundera, turbo diesel, winch, 33'' BFG's,
2 inch body lift, spring lift, Rear locker.
Top
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

No i have just done it in mine and it was a pretty easy job. I did have the motor out but all in all it would have been easy if was in the car
Before All toys there was the Landcruiser
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

From the exedy australia website: http://www.exedy.net.au/sample/catalogu ... ctions.pdf
Some good info in there! and get hold of a gregories manual :D
Push button hi range shouldnt really pose a problem, should have info in the manual about it.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest