Hi, is there anyone who has done a disk brake conversion on a bundera.
IF so what did you use and why.
Cheers Mick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear Disk Brake Bundera ?
Moderators: toaddog, Elmo, DUDELUX
I doubt it.gom11k wrote:Thanks for the info. With using either 80 series or Prado is it just a simple matter of bolt on to the budera conversion ?
id say you will definantly have to move the spring perches and highly unlikely that the links will work either.
The 80 series housing will also be wider than a bundera housing, the prado may be similar width to a bundera diff but unlikely to be exactly the same. So you may need to think about wheel spacers on the front, or an IFS wheel hub, to make your wheels line up again if using an 80 series diff.
Who is online
Users browsing this forum: No registered users and 0 guests