Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pipe bender info needed

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 19
Joined: Tue Aug 30, 2005 5:20 pm
Location: UK

Pipe bender info needed

Post by rustyveedub »

At the moment i am playing with the idea of buying my own pipe bender, So i can make my own roll cage, space frame, and exhausts. I am budgeting at least a few grand on one. Probably a second hand one would be best. Can anybody give me any info on what i will need on a pipe bender or what type and where to buy one. As i have found a lot of places in the US selling them but none in the UK. It would be used for prototype and one off work, So would not need the high volume production systems on it.
Thanks in advance.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

http://www.speedwerx.com.au/tubebender.html

mine cost at a vague memory $700 for bender, $600 2" die, $550 11/2" die.

tube notcher was $400, then there are the saws etc too

very happy with mine

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

There is also Enerpac.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

pipe bender

Post by sudso »

Over here you can buy benders with a hand pump that bend up to 3" pipe for about $300 Aust. They are made in Asia and they're quite ok
They also come with a set of dies from about 1/2 to 1" up to 3" in 1/2" increments

I'm sure you would find a similar kit over there

good luck
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 19
Joined: Tue Aug 30, 2005 5:20 pm
Location: UK

Post by rustyveedub »

Sorry i was talking about a mandrel bender.
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

arnt mandrel benders about $30000 :shock:
Top
Posts: 19
Joined: Tue Aug 30, 2005 5:20 pm
Location: UK

Post by rustyveedub »

Probably, Im getting confused i thought i had found a cheapish mandrel bender but it wasn't.
Top
Posts: 19
Joined: Tue Aug 30, 2005 5:20 pm
Location: UK

Post by rustyveedub »

Has anybody get any pics of what they have made with their tube benders?
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

thread hijack.......


has anyone seen the bender that is advertised in the trading post each week, its $695.00 metal craft or something like that. is this thing any better than the bow and arrow super cheap jobbies........
Top
Posts: 1251
Joined: Sun Jan 02, 2005 11:36 am
Location: Nth brizzy

Post by not not »

I have found with my cheap bender that if i line the die with a peice of led sheet about 2/3 mmm thick it doesnt crush or effect the tube
Just my thoughts Jamie H
Twenty4-7 Rock Racing
#247
http://www.mickeythompsontires.com.au/index.htm
Top
Posts: 106
Joined: Fri Jul 22, 2005 11:26 pm
Location: Box Hill Victoria

Post by Krankieone »

not2.8 wrote:I have found with my cheap bender that if i line the die with a peice of led sheet about 2/3 mmm thick it doesnt crush or effect the tube
Just my thoughts Jamie H
good tip
97 TJ Wrangler OME lift 33"JT's
66 mustang
04 SS 5.7 (wifes)
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

rustyveedub wrote:Has anybody get any pics of what they have made with their tube benders?
If you have a look at my menbers page see link below we did quite a bit of work recently with a tube bender.
Also be awear their is a difference between a pipe bender and a tube bender, also the tube bender quility is less important than the quality of the die to bend in itself.
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 253
Joined: Tue Aug 16, 2005 4:59 pm
Location: Empire Bay NSW

Post by liftkit8 »

MY BENDER SET ME BACK $14 GRAND . ITS NOT JUST A BENDER . THE MOST VALUABLE PART IS THE TOOLING.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests