Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

birfeilds who sells and how much

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

birfeilds who sells and how much

Post by zookjedi »

whats the price for birfeilds for 85 model narrow track, who deals with them , any one know of any wreckers readily stocked with em in NSW or ACT. whats it cost to get a strengthening ring made and installed, any help gratefully appreciated
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I've never heard of birfield rings being made for a Narrow Track, nor have i heard of them being made in Australia.

The closest i can get is suggesting Spidertrax in the states - they sell them for about $50US each.

You should be able to find replacement CV/Axels for around 100 dollars or less so you may find that a cheaper option.

cheers,
Greg
DMA Founding Member #1 - Now Retired
Top
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

I got a 1 litre CV and inner axle (long side) for $55 about 1 month ago
CAM
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

thanks for that
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

NT/WT same?

Post by Damo »

AFAIK the birfs in a NT and WT are the same, it'll only be the length of the inner axle shaft that differs.

Not sure about the 1 litre diffs though, but if the differences in ring & pinions (compared to WT/NT) are anything to go by the 1 litre birfs will be a little smaller and not compatible with NT/WT. Can anyone confirm that for us?
Top
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

The birfs in a 1 litre are a fair bit smaller then 1.3 WT/NT
CAM
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

know i know

Post by Damo »

cool, thanks cam
Top
Posts: 15
Joined: Sat Nov 09, 2002 10:26 am
Location: Newcastle, Nsw

Post by 5link80 »

Stressed

I have made Birfield Rings for a WT.. Just shrink fitted them on to the CV..

Pretty easy to make, just used some high tensile steel.

Fourwheelin was sellin them. dunno if they are gone yet..

Kyle
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests