Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey quick question
is it possible to buy (from where??) the mount to weld onto the chassis on the front for the panhard rod ?
reason im askin is cause i have a cracked chassis and to weld/plate it i need to remove the panhard mount.. but its not in the best shape either so im wonderin if i can buy from say ni$$an or somewhere else just the mount itself
that way i can cut mine off... weld up the cracks in the chassis and plate it then weld on the new mount
Yeah, I just snaped mine the other week. All I did was get a mate who is handy with a MIG and got him to weld it all up and brace it a little. I then found a bracket that bazzle was talking about from a wrecker which cost $50. Havent seen one break with the gusseted bracket yet so they must do there job.
From what I read on the internet hahah (probably not true then), in some thread regarding recalls and nissan, if your car suffers from say cracked front panhard chassis mount you can take it back to the dealer for that particular recall and they have to fix it ??
Is that true or full of shee ight ??
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Personelly I would not worry about the crack you can't get to. Grind out what cracks you can fill with weld then brace. Have seen a few done this way without any more problems.
LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
i would get pics but i got no camera so ill describe it the best i can
it cracks from the top of the rail to the bottom in a / sorta way,, then along the bottom edge of the rail behind the panhard mount and then branches up around the bolt holes on the front half of teh steering box... all cracks are on the inside of the drivers side rail
so would it be safe/strong to just weld what i can get to then plate it and buy that brace to bolt on???
im running 38's and intend on comping it so it needs to be strong
i would get pics but i got no camera so ill describe it the best i can
it cracks from the top of the rail to the bottom in a / sorta way,, then along the bottom edge of the rail behind the panhard mount and then branches up around the bolt holes on the front half of teh steering box... all cracks are on the inside of the drivers side rail
so would it be safe/strong to just weld what i can get to then plate it and buy that brace to bolt on???
im running 38's and intend on comping it so it needs to be strong
