Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Twisted Sector Shaft
Moderators: toaddog, Elmo, DUDELUX
Twisted Sector Shaft
Hey guys – twisted a sector shaft a few weekends ago on my HZJ75. I have searched already and it appears to be nothing about what people have done to prevent this from reoccurring. Any ideas [other than slowing down and putting smaller boots on] are appreciated - hydro assist maybe?
Stock 'Cruiser X 2
www.dnaoffroad.com.au
www.dnaoffroad.com.au
high steer is the best way to avoid it - or a pitman arm with more droop - it is the angle between the draglink and the ground that causes sector shaft twist on lifted trucks, it is usually nothing to do with the size of the rubber.
hydro would help but it is an expensive road to go down. so is high steer I spose. is your 75 spring over?
hydro would help but it is an expensive road to go down. so is high steer I spose. is your 75 spring over?
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 5 guests