Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power steering questions!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Power steering questions!

Post by big bundy »

i have now got the majrity of the stuff to put power steering in the cruiser, i was wondering if this picture would be right.
p-pump
R beside the circle:resivour
R beside the line :return
HP - high pressure
B-steering box

would this be right??

oh and i also need the pulley that bolts onto my crank pully, it is a 22R motor if anybody had one that would be awsome.....i pay cash :)

thanks heaps, greg :armsup:
You do not have the required permissions to view the files attached to this post.
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

All looks ok there greg. Good luck with it.
----HillBilly Engineering----
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

oh and i forgot last night, does a power steering system need to be bled? or does it just sort itself out?

thanks my45
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

just fil the resivour up and start the car and top up as it circulates throu
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

RB zook wrote:just fil the resivour up and start the car and top up as it circulates throu
not a good idear to just start it up, you will cause damage to the pump.

Fill up the resivour lif the front wheels of the deck, and turn from lock to lock with the engine off, about 16 times, keep the resivour toped up while doing this, then star the engine and repeat procedure, then lower the car and your done with no problems. :armsup:

Cheers

Skippy
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

thanks guys, i'll lift the front up and try and get as much into the system before starting it!

cheers greg
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 943
Joined: Sun Aug 24, 2003 2:42 pm
Location: Launceston

Post by Bluey »

skippy's GQ wrote:
RB zook wrote:just fil the resivour up and start the car and top up as it circulates throu
not a good idear to just start it up, you will cause damage to the pump.

Fill up the resivour lif the front wheels of the deck, and turn from lock to lock with the engine off, about 16 times, keep the resivour toped up while doing this, then star the engine and repeat procedure, then lower the car and your done with no problems. :armsup:

Cheers

Skippy
was going to hijak this thread but you have already answered my question Skippy. Thanks
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

p s

Post by sudso »

thats the most phallic pwr stg set up I've ever seen :P

must be a toyota thing :P
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests