Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Matching

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 21
Joined: Mon Jan 10, 2005 3:16 am

Gearbox Matching

Post by Iava64/40 »

Been looking for some information on matching a gearbox off a 2f motor to a 3b as i want to swap out my 2f to a 3b :?
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

You can change the bellhousing and the input shaft from the gearbox to one for a BJ70/BJ73. There are three shafts listed for the 3B compatible gearbox, 1980 - 10/85, 10/85 - 3/87 and 3/87-1990. I'm not sure if the differences are minor enough for one to be compatible with the others, but I'd get the one that matches the gearbox that you have now.

Dave
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

The helix on the layshaft has a different angle , Petrol to Diesel so the input shaft won't fit
J Top
Top
Posts: 21
Joined: Mon Jan 10, 2005 3:16 am

Post by Iava64/40 »

So is it possible to match the petrol gearbox to the 3b motor if so any ideas
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

i just conveterd my gearbox 3b to 2h/2f they are the same box. i was told the difference is in the input bearing and they changed in 85 to a different bearing on the input shaft. but it can can be done you have to change input shaft and nosecone which means full dissanbly of gearbox as its the third last thing out and third thing back in. all need is some suitable pullers to pull out the bearings. and the bellhousing is longer pm me for parts as i have them all hear
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests