Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lancruiser with ford motor

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 8
Joined: Sun May 08, 2005 5:53 pm

lancruiser with ford motor

Post by fastone »

i got a mwb landcruiser fj73 which had a 3f petrol (heavy on juice and not enough power) so i put a ef ford falcon motor in it. just at the starting stage now put eb fuel injectiont on it to bypass smartlock
Posts: 103
Joined: Fri Dec 19, 2003 10:07 pm
Location: North Coast

Post by TUFF60 »

how much trouble was it to fit and what conversion kit/ parts did ya use?
NO EXPECTATIONS, NO DISAPOINTMENTS
Posts: 8
Joined: Sun May 08, 2005 5:53 pm

Post by fastone »

i used a Castlemain Rod Shop adaptor kit. which is straight forward if i was doing again i would get a custom sump made as CRS said to use a cortina sump but bolt holes are different and oil pump is larger.
I used and el falcon motor with eb fuel injaection to bypass smart lock.
i had a 2inch lift kit fitted with 3f engine in and when i took it out and put ford in front became 3 inch lift. But now i can keep up with lasest commodores and walk all over new hiluxes for around $3000 dolars total.
Posts: 108
Joined: Mon Oct 17, 2005 10:32 am
Location: Flinders Rangers - South Australia

Flacon motor into a togo

Post by ellard »

hi there

Sounds like a great conversion - after fitting a 2h diesel to my BJ73 I assume the wirring would have been a nightmare - especially with all the electronic c--p on the falcon motor.

I would be curious to hear some fuel economy figures.

Hear from you soon

Wayne
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests