Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winching

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 119
Joined: Thu Apr 14, 2005 6:55 pm
Location: capalaba / brisbane QLD

winching

Post by rocklux »

how do you stop the cable from spooling up on one side? happened to a ox 10 ooo pound on a very steep hill climb, broke the winch and bent the bull bar.
94 twin cab hilux, 3'' spring, 2'' body, 37'' sticky treps, front & rear air lockers, rockhopper gears.

sponsored by max employment victoria point
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Other than rigging a snatch block so that the rope is lead to the centre of the winch, with most trucks it is not possible to do much else, because the winch is too close to the fairlead.

You need to stop winching before it builds up too much and respool, before continuing to winch.
John
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Have a shorter cable.

IMHO most low mounts run too much cable on them, for the majority of the winching you don't use a full cable and when you need to use an extension strap.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests