Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EFI Vitara Diagnostic Trouble Codes

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

EFI Vitara Diagnostic Trouble Codes

Post by 12uke »

I have read the bible and I have a book that tells me how to do it the problem I have Is that a 94 has a 6 pin plug with the black rubber boot on it and the book i have is for a 4 pin plug. Going from left to right with the clip at the top which ones do I stick the jumper wire in.

_1__2___3__
_4__5___6__

:?
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 117
Joined: Thu May 26, 2005 1:41 pm
Location: Sydney

Post by kimclive »

Hi 12uke,

The plug has six holes but only 4 of them are contacts.

In your drawing the contacts are 1, 3, 4, 6.

The jumper goes from your 3 to 4.

Just check that the centre 2 contacts have no copper inside to ensure that it is the same. My info is that this is the same from 1991 to 1995 models but i stand to be corrected on that.

Pic attached from the manual.

Cheers

Clive
You do not have the required permissions to view the files attached to this post.
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

Thats no use to me as I have 6 wires in a 6 pin plug and just for a play I put the jumper wire in 3 and 4 as would do for a 92 top right and bottom left nothing and the check engine has displayed it's self a few times so there has to be a code in there some where.
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

This may Help:


Fault Codes

The Fault Codes can be read by counting the flashes of the “Check Engineâ€
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

That is no help either as I KNOW what and how to get them out of a 92 vit as it has a 4 pin plug but a 94 has a 6 pin plug where do i put the jumper wire. As the avove post SAYS.
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 117
Joined: Thu May 26, 2005 1:41 pm
Location: Sydney

Post by kimclive »

Try top right to bottom left.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

kimclive wrote:Try top right to bottom left.
As mentioned this has been tried.

u tried this?
http://suzuki-club.com.ru/Portals/0/wiring2.pdf

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

nicbeer that page will not load is there another version of it.
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Use http://babelfish.altavista.com/ on the root www site

http://suzuki-club.com.ru/

Click on vitara and the links on the right

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests