Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Pinion Flange Nut (PITA)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Front Pinion Flange Nut (PITA)

Post by vanzbrown »

Anyone know if this by some chance is reverse thread on my 60series...

Its being a real pain in the arse.

Tried everything and spent the best part of yesterday arvo trying to work it loose.... Buying a metre long piece of tube pipe to put on the end of the socket for a bit more leverage today.


Driving me nuts, the back one was easy enuff... But this one...Grrrr.

Leeroy
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

It is normal, right-hand threaded like the rear. Did you undo the staking? If you use a strong rattle gun and block the wheels (lock the hubs of course) you don't even have to undo the stake.

Dave
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

as Dave said - rattle gun will pop it off, usually you won't even need to lock the hubs, the inertia of the whole assembly is enough to get it off. if you don't have a rattle gun, most garage workshops will pop it off for you for a sixpack.
Free air locker to the first 20 callers!
Top
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Post by vanzbrown »

Yeah, ended up cutting it off with a drill and chisel... Had a 3 foot bar trying to get it off and bent a sidcrome L-Socket Extention...

Noticed to, that even when the new seal and nut, done up tight, there is still play in the pinion gear... Dont think this is normal as the rear wasnt like this. Is it possible the bearing further up the line is warn.

Could it be anything to do with the fact that the back of the pinion flange had groves on the back of the shaft which would suggest that its rubbing somewhere...

NOt to worried about it, but just not to sure either.

Thanks guys.
leeroy
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

vanzbrown wrote: Noticed to, that even when the new seal and nut, done up tight, there is still play in the pinion gear... Dont think this is normal as the rear wasnt like this. Is it possible the bearing further up the line is warn.

Could it be anything to do with the fact that the back of the pinion flange had groves on the back of the shaft which would suggest that its rubbing somewhere...
There should be no play there, the pinion bearing may be toast. Perhaps the seal is leaking because there is too much play in the bearing.

Pinion flanges can develop wear with high kms. If you can get your fingernail to catch on the grooves, it's time to get a new one or get a Speedi Sleeve placed at a machine shop.

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests