Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ford engine conversion

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 32
Joined: Tue Oct 11, 2005 9:29 pm
Location: albany wa

ford engine conversion

Post by big_yella »

just chasing some hints advice etc. i am gonna stick a 302 windsor into a 1981 2 door rangie. i already have a c4 auto mated up to a transfer but im stumped on the engine mounts. is there a mob that make a conversion for these engine mounts or do i need to make my own? anyone who has done this conversion pls help!
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Use ford bellhousing starter convertor etc ford engine mount and fab your own mounts to the chassis i'am not aware of anyone who sells a kit
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 32
Joined: Tue Oct 11, 2005 9:29 pm
Location: albany wa

Post by big_yella »

ok. no worries! thanks for that
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Castlemaine Rod Shop in Vic used to do a kit for this, worth a call to them to see if they still do it.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests