Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i own a runner and very happy with it. The running gear is more stronger in the runner then the paj i'm going to fit a 1KZTE to my runner very shortly.
that would be the cheap option and dude i own a 80 series and it rocks buying a gq would be a step backwards but the question was for a friend not me i like the paj very strong running gear especialy front cv in the v6 and with a bit of tinkering under the front end u can get 4,5 inches out of them the thing i worry with the 4 runner there narrow.
Drive both, and buy the one you like. They're both capable. Mind you, the dunnydore V6 would be a nice motor off road and the 4runner already has a 4" lift.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb
Experience is something you don't get, until just after you need it.
with a bit of work u can get that much travel out of ifs but what would be cheaper do a sas conversion or have the front ifs redesigned to take a 5i lift
a mate of mine has got a paj it has rear diff locks this helps it out but it lacks travel in the front but that s the joy of ifs either one are capable .personal choise
do it in the dirt .. unlocked 80 ser.2in.lift.285/75/16 b/stone at...one day go higher and locked