Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lockers for your Rocsta??? Sportage???? Some rears and all fronts of Korando, Musso, Rexton??? yes they are available!!!
TF lockers in South Korea make them. If there is enough interest in them (20 units total) I will organise a shipment, ~$450-500 each, landed. (320000 Won + S/H). If there is not 20 units in total price goes up ~$120 (420000 Won + S/H).
Somewhere in SK there are lower R&P sets too...
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Your kidding how did you find them R&P's look out maybe i'll be able to step up to 33". How soon do you need to know. I'll have to check the bank account.
Trying to see if there is enough interest in bringing up a seperate order for us, or to be a part of a larger order being organised here (the two stickied TF locker threads). BTW this is where the Kia Sportages live
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
I know that ARB have air lockers for Musso/Korando/rexton as the diffs are Dana's 44 rear and 30's in front. Mechnical lockers are no good for the all wheel drive in petrol models of Ssangyong as they have Full time.
[quote]ROCSTA (KIA) 1990-1998[/quote]
noooo i have a 1999 rocsta!!?? they look exactly the same hopefully they are but obveously not if they ont mention them :( tears.
ive been looking for ages for lockers.
[img]http://www.users.bigpond.net.au/fuknukl ... 0large.jpg[/img]
noooo i have a 1999 rocsta!!?? they look exactly the same hopefully they are but obveously not if they ont mention them :( tears.
ive been looking for ages for lockers.
The model year by the time they were complianced in Oz may technically make them a 1999 model. See if you can see a build date sticker or stamping under the bonnet, ie. not the date on the alloy compliance plate.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
RockyF70 wrote:would this company have em for rocky's by any chance? in that case, i'll take 5 and re-sell sum
Mainly South Korean and some common American brands.
Easiest way might be for you to go to Hilux diffs if you have a center rear output, or something like a 40 series or MQ if you have offset rear.
I feel you pain......
lux diffs would be sweet, but unlike sum ppl, i dont have a rocky just do be different, it was all i could afford at the time, and i worked out would be cheaper to buy an old hilux than to put its diffs under mine
RockyF70 wrote:would this company have em for rocky's by any chance? in that case, i'll take 5 and re-sell sum
Mainly South Korean and some common American brands.
Easiest way might be for you to go to Hilux diffs if you have a center rear output, or something like a 40 series or MQ if you have offset rear.
I feel you pain......
lux diffs would be sweet, but unlike sum ppl, i dont have a rocky just do be different, it was all i could afford at the time, and i worked out would be cheaper to buy an old hilux than to put its diffs under mine
Tell me about being different
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
DAMKIA:
i had a good look mate but couldnt find anything there cept the metal plate in plain view of the engine bay with 12/99 stamped on it and 'this vehicle made to comply with the manufactutors act of 1989'
must be the compliance plate which means nothing huh.
Ive spent the last half hour searching for when rocsta's where last made, if i can find some form of list regarding the years rocstas where made they may state 98 as the last year.
if so -yay for me, if not -then hopefully theres no difference between the 98 and 99 diffs
I havnt seen any other 99 models so u might be right.
fnukle wrote:DAMKIA:
i had a good look mate but couldnt find anything there cept the metal plate in plain view of the engine bay with 12/99 stamped on it and 'this vehicle made to comply with the manufactutors act of 1989'
must be the compliance plate which means nothing huh.
Ive spent the last half hour searching for when rocsta's where last made, if i can find some form of list regarding the years rocstas where made they may state 98 as the last year.
if so -yay for me, if not -then hopefully theres no difference between the 98 and 99 diffs
I havnt seen any other 99 models so u might be right.
please please
HTH for what little it was...
May need daylight and a clean to see any metal chassis/body stamping. generally common areas are around the turret or chassis rail.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
fnukle wrote:fuk it i'll just get a front and rear set for the rocsta.
so whats the story is this thing still going?
As far as I am aware you should still be able to get them thru Tf Lockers. It may be easier to contact a South Korean retailer to purchase them.
If you need translation services, try contacting the Student Union of your nearest University and asking if they have a Korean Student Club - it's surprising what some students will do for a slab. Don't bother with altavista etc, they don't work well with calligraphic languages.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
R&P's look out maybe i'll be able to step up to 33". How soon do you need to know. 
