Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BOBTAILIN RANGIE

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 26
Joined: Wed May 11, 2005 9:15 pm
Location: N.F.I !

BOBTAILIN RANGIE

Post by MACK1 »

HI GUYS, AM THINKING OF BOBTAILIN/ UTEING A RANGIE, :twisted: QUESTION I HAVE IS THE ALLOY OUTER PANEL, IS IT JOINED TO A STEEL INNER FRAME? AND ARE THEY RIVETED OR URETHANED TOGETHER? OR CAN ANYONE POINT ME TOWARDS A SITE REGARDING THE ABOVE, I CANT SEEM TO FIND ANY? THANKS
***DONATING TO LOCAL LAW ENFORCMENT....ONE TICKET AT A TIME***
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

What model will be the base ? the outer panels are self tappered with a few rivets onto a steel shell.
You do not have the required permissions to view the files attached to this post.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 23
Joined: Fri Jul 08, 2005 11:10 pm
Location: England, Eastern Europe it depends

Contact:
Contact Dollythelw

Post by Dollythelw »

the rear wings are self tapper'd to the bodyshell along the horizontal, rivetted to the shell at the front vertical - theres a fair dollop of panel sealant in there too, you will have to drill out the rivets that hold the rear quarter pods to the shell (open the lower tailgate and you will see them) as the pods and rear wings are bolted together, it takes about 10 mins a side on 2 door.

I'll have a pretty crappy website put together before the end of the weekend with pigs build on it and you can see from there if it helps?
Nothing exceeds like excess......
Top
Posts: 26
Joined: Wed May 11, 2005 9:15 pm
Location: N.F.I !

Post by MACK1 »

I'll have a pretty crappy website put together before the end of the weekend with pigs build on it and you can see from there if it helps?/quote

MATE THAT WOULD BE GREAT, I CANT WAIT TO SEE IT, THANKS GUYS I WILL HAVE TO MAKE A START. BY THE WAY ITS A '77 2 DOOR.
***DONATING TO LOCAL LAW ENFORCMENT....ONE TICKET AT A TIME***
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Are you doing the full bobtail (shortening the body ) or just making it a ute ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 20
Joined: Mon Mar 08, 2004 9:01 pm
Location: Goulburn

Bobtail ute

Post by chire »

I have just completed a ute bobtail conversion on a comp truck have lots of pics if you are interested. :?:
Top
Posts: 23
Joined: Fri Jul 08, 2005 11:10 pm
Location: England, Eastern Europe it depends

Contact:
Contact Dollythelw

Post by Dollythelw »

bit late I know and its a crap website but its the best I can do :?

Pigs website

Cheers

Jez
Nothing exceeds like excess......
Top
Posts: 20
Joined: Mon Mar 08, 2004 9:01 pm
Location: Goulburn

Bobtailin

Post by chire »

Sorry mate but havin hassels sending pic any assis would be good but shall keep on tryin.
Top
Posts: 32
Joined: Tue Oct 11, 2005 9:29 pm
Location: albany wa

Post by big_yella »

im just doin a ute conversion myself on a 81 2 door. thought i was just gonna take off the rear and attach a new tray... HA. at the moment it is totally stripped down. i found so much rust in the sills and the floor. then along came an unlicensed rangie with a 302 windsor conversion. so i had to drop that engine into my ute! soon for paint and engineering! yay. i have a few pics but i have to add a few more yet.

http://community.webshots.com/user/tcpr_024

hope they help at all
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 30 guests