Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Problem with Rockhopper install

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4
Joined: Fri Jun 11, 2004 1:55 pm
Location: newcastle

Problem with Rockhopper install

Post by JacePatrol »

Ive just installed a set of rockhopper gears, had no problems with getting them in, but after I put the transfer case back together I couldnt shift into two wheel drive. I can shift from 4H to 4L and back, it engages easily and the gears turn smoothly.

I think that the bigger gears might be getting in the way of the shift fork preventing engagment of 2WD. Ive heard that the shift fork may also need some grinding back, but its hard to see where the contact is. I dont know if this is the actual problem or if its just something else ive stuffed up

Any help or advice would be much appreciated

Cheers
Jase
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

either way unfortunatually you will have to rip it apart again and see for yourself i know some mods are to be done when installing rockhoppers but i don'y know what :?
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

hops

Post by china »

Jase,
can u keep us posted ? as i will be do'n mine soon, and any help/tips would be tops.
did u have to take tcase out or can it be split still in car??
:idea: did u want to practice on mine? ;)

daz
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

the case will need some grinding to clear one of the gears ive heard...

your best bet is to call liam @ bigballs offroad and ask him.. as he supplies those gears.

TOM
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

i have put in the marks gears and they definitely need a big slice cut out of the fork. seeing as the gears are very similar ratio to the rockhopper i would assume they need the same. the marks gears have a diagram in the instructions showing how much to grind out.
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

I have recently fitted a set of Gearmaster gears, if you need I can send you the installation instructions showing the areas to grind, I imagine it would be simillar to Rockhoppers.

As Wendle said you definitely have to grind the fork.
Top
Posts: 4
Joined: Fri Jun 11, 2004 1:55 pm
Location: newcastle

Post by JacePatrol »

Thanks for the advice, if anyone has a copy the the gearmaster installations instructions would you be able to email me a copy please
ongjase@yahoo.com.au

hey daz, if or when i manage to get these gears in properly, ill post up what i did, got a few pics too
Top
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

grs

Post by china »

:armsup: :cool:
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

That might be another reason to consider those other lower reduction kits.


Hmmm.. chopping into the shift fork too? Not good.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 110 guests