Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sprung over?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Sprung over?

Post by ofr57 »

hay just a quick question is changing a zook to sprung over illeagal in qld? ... i think it is but just not sure?
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

yes, unless you get it all engineered and passed etc by nearly everyone.

pm redzook, hes got a SPOA daily driver that is legal
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

Spike_Sierra wrote:yes, unless you get it all engineered and passed etc by nearly everyone.

pm redzook, hes got a SPOA daily driver that is legal
redzook lives in nsw so will be no help. Do a search this question seems to come up weekly
P.E.T.A
People eating tasty animals.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

ask the QLD DOT and find out for sure but yes it is basically impossible to do legally in QLD.

I still think everyone should be asking their own state authourities about any questions on legality rather than relying on internet heresay
Ransom note = demand + collage
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

its perfectly legal if you never get caught, dont have insurance and most importantly dont hit and/or kill someone.. good mate of mine is going spring over on his rocky and has been informed by Q transport that it voids his compulsory third party because it is welding to the diff (which is apparently illegal) and therefore makes your registration void. so it isnt legal even with an engineers report, or a good mate in QLD.

sorry, please prove me wrong though....
turbos are nice but i'd rather be blown
Top
x rated
BRADEN TAGG, owner of XRO RACING
Posts: 361
Joined: Wed Jul 20, 2005 3:41 pm
Location: Sunshine Coast

Contact:
Contact x rated

Re: Sprung over?

Post by x rated »

ofr57 wrote:hay just a quick question is changing a zook to sprung over illeagal in qld? ... i think it is but just not sure?
if its leaf sprung...... Yes!

You can go coils.... coily diffs.... and get your chassis engineered. or just start with a rolling coily chassis. :D


"DOT SUCK in Queensland :finger: "
Outerlimits - where right is wrong and wrong is right - Does your mum know your on here?? its past your bedtime little kids
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Re: Sprung over?

Post by RB zook »

x rated wrote:
ofr57 wrote:hay just a quick question is changing a zook to sprung over illeagal in qld? ... i think it is but just not sure?
if its leaf sprung...... Yes!

You can go coils.... coily diffs.... and get your chassis engineered. or just start with a rolling coily chassis. :D


"DOT SUCK in Queensland :finger: "
i got some coily diffs :D the rear diff is setup for a 3 link panhard setup
:armsup:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 676
Joined: Sat Jul 23, 2005 6:03 pm
Location: Maroochydore

Post by cutzook »

i have SOA in my daily driver with flat leaf packs and i have not been pulled over...YET. It is not engineerable in Qld.
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

ner ner mine's all engineer approved, regestered and blue plated in QLD !!!!

The catch is that it was done when it was still alloud so now the blue plate it still current

mines approved for 1600, SPOA, hi steer, ute conversion, roll cage, rear tray, rear disc conversion, harnisesses & powersteering conversion

filled two blue plates :roll:
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

but can he do a spring over using hilux diffs as they allredy have the spring perches on top so no welding is needed on the diff.
Top
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

Highly doubt you will get lux diffs engineered.
Top
Posts: 1142
Joined: Fri Feb 18, 2005 6:25 pm
Location: brisbane

Post by largesuzy »

Zookified wrote:Highly doubt you will get lux diffs engineered.
it is quite possible with a good engineer i have seen it done before
89 lux 2bl 4inch spring 35's etc still slow as a snail
Top
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

member on here?
Top
Posts: 1142
Joined: Fri Feb 18, 2005 6:25 pm
Location: brisbane

Post by largesuzy »

Im unsure i dont think so he had it a while ago so may have gotten in under old rules similar to oozuk
89 lux 2bl 4inch spring 35's etc still slow as a snail
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest