Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What size can i fit under a 2" on a live axal 100 serie

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1
Joined: Sun Sep 18, 2005 10:32 pm

What size can i fit under a 2" on a live axal 100 serie

Post by Stevencc »

Hey guys,
I've got a 1998 100 series with just a 2" lift, plenty for me (for now ) But i was wondering what size tyres i could fit under without any cutting or anything, and what i could fit under with just a little but of cutting, I'm trying to figure it out before i go around looking at tyres, and i dont wanna have to go to a place and ask to try on a tyre to see if it will fit, its not like a shoe store, they should be but hehe,
I'm looking at getting mungrols of JT2's something with a little bit of bite, but not to costly, I'm guessing 33 for no cutting and MAYBE 35's with alot of cutting,
Posts: 17
Joined: Mon May 09, 2005 9:17 pm
Location: melbourne

Post by tukes »

Ive got 34 JT 's 2 on mine with ome 2 and a bit lift rubs on the front mud flap when suspension compressed and steering near lock. ended up taking off front flaps before they were ripped off.
Other than that on problems. oh width was 11.5 rubbing seems to be left
side mostly
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Post by Kruza »

Does anyone think u can run 35's with only a 2" lift?

The reason im asking is i have heard that u can on an 80 and was wondering if there would be any difference?
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Post by Kruza »

Does anyone think u can run 35's with only a 2" lift?

The reason im asking is i have heard that u can on an 80 and was wondering if there would be any difference?
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

Post by greenfourby »

Kruza wrote:Does anyone think u can run 35's with only a 2" lift?

The reason im asking is i have heard that u can on an 80 and was wondering if there would be any difference?
I have heard of running 35's an a 2" Lifted 100 but you need to chop out some of the plastic mud flap at the front (Or remove them !!)
[url]http://www.my4x4.com.au[/url]
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

i have

Post by known 2 »

i've run 35/12.5 x-terains one my 80 series with a 2 inch lift only rubed at back on mud guards when suspension pushed up close to max
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

hey me again i have an 80 series and until recently I had a 2"inch old man emu suspension 30mm coil spacers and long travel shocks, with no sway bars I had 285/75R16 and the rear tyre scrubbed on the inside tub.
Now I have a 2"inch body lift, I run 35/13.5R16 Claws no bump stops and they don't scrub at all. I had enough clearance to fit 35 before the body lift, but I would have scrubbed out more. Note: 100kg coils in the rear.
You do not have the required permissions to view the files attached to this post.
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Post by Kruza »

If i leave the swaybars connected do u think i would still have problems with 35's
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

it should be better if you can clear them under your guards then your sway bars will limit your wheel travel thus your 35s shouldnt scrub.
you can legally do a two inch body lift thats a option then they will def fit k hope i helped
Post Reply

Who is online

Users browsing this forum: No registered users and 50 guests