My Sammi motor into SJ410 project is just about complete. I lucked out on the trans mount, as Suzuki redesigned the trans in 85 so that the rear housing is the same as the Sammi 5-speed, so it also uses the same mount. So all I had to really deal with was the motor mounts and the rad mounting. Since the back of the trans was the same and mounted in the same location, I didn't have to cut the shifter opening. One problem I've run into and can't solve is that the parking brake drum is missing the studs to mount the rear driveshaft. I'm hoping somebody can help me get these, as the parts stores here have nothing like them, and of course since Suzuki never (officiallly) imported these here, the dealer can't help. Does anybody have any of these laying around they could help me with? Right now I've got a standard flange on the t-case so I can install the rear driveshaft, but that puts me shy on those special bolts (by four), so I can't install the front d-shaft. Not a big deal right now, but it will be in about a month or so when the snow starts!
Thanks!
IJ
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
E-brake drum studs?
E-brake drum studs?
The only difference between a rut and a grave is the depth.....
Who is online
Users browsing this forum: No registered users and 0 guests