Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RUF on sierra

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Maybe not allowed to use gif's

""In relation to steering "geometry" the problem is that if you go all the way forward (about 40mm) with the axle, the pitman arm will just touch the tie rod at full compression, and the drag link and the tie rod sweep across exh other and rub the pint off. no big deal, but a bit hack looking. There are three ways to fix this. One is to move the steering box forward when you move the axle forward, the other is a bumpstop spacer, and the third is to run a vitara PS box with a flat pitman arm. (or like Greg, do all three ) ""

Can u run a 10mm spacer in between the stock box?

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

No, interesting that - I was trying jpegs and getting the extension thing, but didn't with .gif and get the little question marks. oh well. I am a Mac user so I clearly know nothing about computers ;)

I'm not sure what you mean by the 10mm spacer. Where would you put it?
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

oops, just realised that a sierra box mounts on the side and not on the front of the chassis. Whats the easyiest way to move it forward.

I am guessing new holes and crush tubes?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

if I could get the photo's to work I would show you (GRRRR) , but yep, it is new crush tubes etc. you will find that if you remove the plate that the steering box bolts to and cut the original crush tubes out, you will realise that there is almost no meat inthe chassis on that side, so it is better to cut it all out (cut just in front of the VIN) and rework it all from there. this is what we did to satisfy the engineer. for Gregs, it has puddle welded sleeves that run right back to the highest point of the chassis and all teh way to the new front of teh chassis. All up, the sleeves were about 400mm long (!) the chassis is all 5.5-6mm thick through this area as MR engineer specced 3mm thick sleeves (internal) on the sides and 300 doubling plates (external) top and bottom. the butt weld had to be at a 45 deg angle - mate it wnet on and on. The engineer bascially specced the extension as though we were extending the chassis between the wheels, whereas where it is, the extension is only bearing 1/4 of the weight of a 1000kg car. Mind you, now it is finished, it looks way cool with all the 2" diameter puddle welds etc- in fact, we started to work speedholes into everything else onthe car to match the puddle weld holes we drilled int he extension.

This is why it is worth doing with the power steer conversion - it make all the work seem more worthwhile. If I wasn't going to rework the mount to run a PS box anyway, I would just bumpstop space the car and leave it at that. It's really no big deal.

PS when it goes this far, you almost want the car stripped to a bare chassis so all the welding can be done "in position" rather than lying on your back. at the very least, pull the radiator and front clip off.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

email them to me mate
chunkz@hotmail.com

i'll see if i can get them up
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

pics
You do not have the required permissions to view the files attached to this post.
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Hey Gwagonsteve,

Do you do this for a crust or just yourself and mates, if you do get paid for this stuff, how much are we looking at? Break it down if you can chass ext, p/s, bumpstop etc. It'll all help
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

ahahah i just asked him same question

I'll save him some time and say, no he is busy
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

very quickly (as I am off to bed - get up before 6 (ouch)

i don't do it for a crust, only for myself and club members. I only recover costs.
I occaisionally put together small batches of 2" body lifts for club members only too, again, pretty much at cost.

Really, for the hours that go into this stuff, it can't be done commercially - no one would pay - there is too much time in it.

There is about 15-20 man hours in an extension, drive in/drive out, that's with really basic shock mounts and stock bumpstops relocated. Many of these jobs are pretty easy of you have a bare chassis, but then you have another 20 man hours of disassembly and many more of reassembly. I thought about putting together this stuff as a package but really, there are so many variables and the real key is the quality of the install not really the fab so there is too much riding on it.

what I put together now works pretty well, but as I said, every time I do it I turn it into more work so it pretty much ends up being a big build.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Gwagensteve wrote:very quickly (as I am off to bed - get up before 6 (ouch)
I have been building a set in a loading dock at kings cross untill about 15 mins ago and I am getting up at 4.30am, (I am a dickhead, who does this crap for a living?)
"6am" ppppfffttt
Peter.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

droopypete wrote:Mate, you live 10 mins from my place, come around and have a look, or go to a suzuki club meeting and look at many.
Peter.
Hey chunkz, the suzy club meeting is tonight, do you need a lift?
(I am trying to make this as easy for you as I can :) )
Peter.
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

droopypete wrote:
droopypete wrote:Mate, you live 10 mins from my place, come around and have a look, or go to a suzuki club meeting and look at many.
Peter.
Hey chunkz, the suzy club meeting is tonight, do you need a lift?
(I am trying to make this as easy for you as I can :) )
Peter.
Chunkz,

if he offers you a lolly pop SAY NO!!!.

Only kidding, if you can take up the offer of the ride to the club, it will give you a good idea on how his car rides etc etc and will give you a better idea of what to do and expect from your car.

James
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

just hope its not raining and if he stops at Maccas make sure YOU know where the car is parked :D
Ransom note = demand + collage
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

grimbo wrote:if he stops at Maccas make sure YOU know where the car is parked :D
Oh Graham, that is so hurtfull :cry: :cry: :cry: :cry: :armsup:
no Macca's for me I am on a diet :armsup:
Peter.
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests