Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Snorkle on Carby Rangie

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Contact:
Contact Jay

Snorkle on Carby Rangie

Post by Jay »

Has anyone fitted a snorkle on an older 1983 Carby rangie?
Connection endpout of the snorkle where is it to be located?
Anyone did his own snorkle please advise?

Jay
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

3" exhaust pipe with 2 bends and some reinforced flexible hose is all you need, i take it yours has the single oval filter housing with intake in the middle ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Contact:
Contact Jay

Post by Jay »

Loanrangie wrote:3" exhaust pipe with 2 bends and some reinforced flexible hose is all you need, i take it yours has the single oval filter housing with intake in the middle ?
Loan Rangie

You know these model bolt for bolt.

Yes mine has the center air intake in the middle.
I will need to create a hole in the hood no?
Would apprecaite any pics you have in this regard.

Jay
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

You will need to cut a hole in the decker panel ( between bonnet and windscreen) if you look at the post up your rovers post, there will be some with snorkles fitted. Yours will be on the opposite side being a lhd vehicle.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 36
Joined: Fri Aug 08, 2003 9:14 am

Post by LRHybrid100 »

similar to this but with longer flexi hoses:

Image

Image

HTH

LRH
TDI 30D 1987 Rangie 300 TDI Auto
LRD 100 1993 LR Defender 100" (being built)
Top
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Contact:
Contact Jay

Post by Jay »

Loanrangie wrote:You will need to cut a hole in the decker panel ( between bonnet and windscreen) if you look at the post up your rovers post, there will be some with snorkles fitted. Yours will be on the opposite side being a lhd vehicle.
Loan Rangie

Looking at the pics it seems the snorkle is fitted to an injection engine mine is a carby i so the hose should be connected to the central air inlet.
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Top
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

Jay hope this helps.

Cheers Kev
You do not have the required permissions to view the files attached to this post.
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Looking at the pics it seems the snorkle is fitted to an injection engine mine is a carby i so the hose should be connected to the central air inlet
Actually, if you take another look to the left of all the snorkle stuff you were busy looking at, in his first photo, you'll realise that its a 300Tdi - not even a petrol engine, so injection would be the least of the differences :P
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I wasnt talking engine specifics, just the exhaust pipe snorkle as a guide.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Lol, I know. was just stirring jay. My snorkle is done now :armsup:

3 inch pipe with two prefab bends welded on....
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 36
Joined: Mon Sep 08, 2003 9:53 pm
Location: Vic

carbie snorkle

Post by Fubar Paul »

lets keep it simple .use your standard bends out of the carbi then 3" hose join to a T pice made out of 3" exhaust pipe .the botom leg of the T runs to the front of the car between the carbies then with some 3" flex you run up to a standard EFI air filter then in to your snorkle.
Hope this helps ,I do have pics if required
The liver is evil and it must be punished!!!!!!
Top
Posts: 18
Joined: Wed Apr 06, 2005 12:57 pm
Location: mornington peninsula vic

Contact:
Contact kaistuff

Re: carbie snorkle

Post by kaistuff »

Fubar Paul wrote:lets keep it simple .use your standard bends out of the carbi then 3" hose join to a T pice made out of 3" exhaust pipe .the botom leg of the T runs to the front of the car between the carbies then with some 3" flex you run up to a standard EFI air filter then in to your snorkle.
Hope this helps ,I do have pics if required

CAN YOU EMAIL ( KAISTUFF@TPG.COM.AU) PICS OR POST THEN PLS :)


THANKS
kaistuff
1979 Red 2 Door 3.5V8 Range Rover

GO FURTHER
GO HARDER
RANGE ROVER
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 51 guests