Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
EFI
Moderators: toaddog, Elmo, DUDELUX
Dude, the later 60 series and early 80 series had 3FE engines which were basically a 3F but injected. You could probably swap the heads over but by the time you do it, wire it/install it/ tune it, it might be more cost effective to sell your current 3F and buy a 3FE from a wrecker. You would probably be looking sub 1K for a decent one (Im no expert though). Should be a straightforward swap. Then again if you are going to pull the engine out, fit a 1uzfe 
V8, Same capacity, heaps more power. Up to you though.
Hope this helps, good luck.
V8, Same capacity, heaps more power. Up to you though.Hope this helps, good luck.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Who is online
Users browsing this forum: No registered users and 0 guests