Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Simex Questions

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 161
Joined: Wed Sep 14, 2005 4:57 pm
Location: Auckland, NZ

Simex Questions

Post by NZ4x4 »

Ok maybe someone on here can help me out with this and set things straight once and for all.

Info is in the pic attached, so read that.

Cheers
Sam
You do not have the required permissions to view the files attached to this post.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

It's mainly the widths that vary in the actual sizes, which I would assume is from using different sized rims when measuring. The dias are reasonably consistent. .

Simex always seem to be way off in their own measurements, which may be done for comp reasons.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

have you emailed simex?
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

for starters the 32,9.5 et does not measure 33.4" on a 7 or 8" rim.
buggy time............
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

bazooked wrote:for starters the 32,9.5 et does not measure 33.4" on a 7 or 8" rim.
No, but the 32x10.5's are around that. They're big.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 161
Joined: Wed Sep 14, 2005 4:57 pm
Location: Auckland, NZ

Post by NZ4x4 »

I have emailed simex nz but got no reply, my email my have bounced though.

Simex 4x4 says that the 32x9.5x15 measures 33.4x10.5x15 and Simex NZ says the same.
Top
Posts: 445
Joined: Mon Apr 18, 2005 12:32 pm
Location: Victoria

Post by mistaboz »

Maybe a standard rim size should be put into place when measuring tyres.
eg. if tyre is 10.5 or bigger then an 8" rim
if tyre is smaller than 10.5 then a 7" rim.
I dont understand why they cant just make it al standard...
Top
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

Ring Tyreline in Hamilton on 0800 474 639.

Chris Malcom used to be the guy to talk to, but he has recently left. Suggest you speak with Grant or David Rushbrooke.
Top
Posts: 161
Joined: Wed Sep 14, 2005 4:57 pm
Location: Auckland, NZ

Post by NZ4x4 »

Have been talking to these guys. that is where www.simextyres.co.nz take you.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests