Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lifting an F78 Rocky

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 53
Joined: Sat Oct 01, 2005 11:21 pm
Location: Rockhampton, Queensland

Lifting an F78 Rocky

Post by Floody_1985 »

G'day All,
Just wondering if anyone has lifted their Rocky's (in particular the F78 model) up a few inches, and roughly the cost of the project??

Been doing a fair bit of 4WD the last few weeks, and finding she bottoms out easier than I thought. Particually when you have 4 people in it, :shock:.

Cheers

Floody
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Hey champ...

I recently bought an F78 and have been looking into lifts also.

I found raised springs for $220 to lift the rear 40mm... fit some bigger tyres under and give some more clearance.
You'd also need shocks and Ranchos were about $250 a pair.
You can raise the front by winding up the torsion bars.. but new heavy duty ones will cost about $530...
That was through 4wd1.biz...

Ironman also do a lift package (DAI011bkg) which is raised coil springs, torsion bars and 4 shocks..

I'll let you know if I found out any more info mate. :D

P.S- Your bullbar looks sweet as... where did u pick it up from??
Posts: 53
Joined: Sat Oct 01, 2005 11:21 pm
Location: Rockhampton, Queensland

Post by Floody_1985 »

Thanks for that HotFour.

The bullbar was on it when I bought it 2 years ago now. Still struggling to work out what brand it is, :?.

Here's another shot of it for you.

Cheers

Floody
You do not have the required permissions to view the files attached to this post.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest