12V pressure switch

[sootygu]

I am about to install an on board compressor using a SD508 a/c compressor. Trying to source a 12v pressure switch similar to those on a 240v, I want to ensure that when the unit cuts out at max pressure the air is released between the unit and the switch.

Are 12v units available and where can they be sourced, or can 240v units be used.


Thanks

[bigbluemav]

You can use a 240V switch, just get it from a compressor supply place.


Regards

[bigbluemav]

You can use a 240V switch, just get it from a compressor supply place.


Regards

[Tiny]

gasweld have them, stadard 240v adjustable

[sootygu]

gasweld have them, stadard 240v adjustable

Do you have a part number or brand name for I was quoted well over $100 and i didnt think they were that expensive.

Thanks

[RoldIT]

You shouldn't pay anymore than about $60-70 for a 240v Condor pressure switch but I am unsure of prices for the 12v jobs (other than Bigballs) as virtually no one stocks them.


http://www.bigballsoffroad.com/prod926.htm

http://www.airide.com.au/index.php/cPath/1_5_25

[Tiny]

gasweld have them, stadard 240v adjustable

Do you have a part number or brand name for I was quoted well over $100 and i didnt think they were that expensive.

Thanks

gasweld P/N 535110 $39.00 ea inc gst

[Tiny]

or

http://www.my4x4.com.au/onlinestore/sto ... duct=10719

preset

[sootygu]

gasweld have them, stadard 240v adjustable

Do you have a part number or brand name for I was quoted well over $100 and i didnt think they were that expensive.

Thanks

gasweld P/N 535110 $39.00 ea inc gst

Thanks for the info Tiny

[80UTE]

i use the ARB compressore switch and from memory when i brought the last one it was $25-$30 its simple, has no adjustment, compact to fit and does the presures that 4B's need to run the air stuff commonly fitted.

Wally