Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how much would it take to fit 37s-38s

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

rangie

Post by MONGREL »

Here are some photos of my rangie, at the monent this is all have as i sold it but i am buying it back for 2k unregistered and motor not running.
If it is not an easy fix i will go for a 307 chev that i have lined up for $400.
At the moment its the stock 3.5, pretty sure its standard height, I cut the guards and put on a set of 32inch mongrels

How much lift would it take to fit 37-38s? And im not worried about cutting guards.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 106
Joined: Wed Aug 18, 2004 3:05 pm
Location: S.E Suburbs, VIC.

Re: rangie

Post by PSI250 »

MONGREL wrote:How much lift would it take to fit 37-38s? And im not worried about cutting guards.
I think cutting guards would be the least of your worries, driveline breakages would be your main concern.
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: rangie

Post by Micka »

PSI250 wrote:
MONGREL wrote:How much lift would it take to fit 37-38s? And im not worried about cutting guards.
I think cutting guards would be the least of your worries, driveline breakages would be your main concern.
:roll: Hello... Maxi Drive/McNamara :roll: :finger:

A 4" lift and 2" body lift will fit 37s with a little bit of cutting.

For more info...have a look at AnthonyP's build up pics. His white RR was on 37" Creepies and will soon be running on 39" Irocs. :cool:

Micka
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Re: rangie

Post by Loanrangie »

Micka wrote:
PSI250 wrote:
MONGREL wrote:How much lift would it take to fit 37-38s? And im not worried about cutting guards.
I think cutting guards would be the least of your worries, driveline breakages would be your main concern.
:roll: Hello... Maxi Drive/McNamara :roll: :finger:

A 4" lift and 2" body lift will fit 37s with a little bit of cutting.

For more info...have a look at AnthonyP's build up pics. His white RR was on 37" Creepies and will soon be running on 39" Irocs. :cool:

Micka
Yeah but we all know Grimace is a web wheeler :armsup:
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: rangie

Post by GRIMACE »

Loanrangie wrote:
Micka wrote:
PSI250 wrote:
MONGREL wrote:How much lift would it take to fit 37-38s? And im not worried about cutting guards.
I think cutting guards would be the least of your worries, driveline breakages would be your main concern.
:roll: Hello... Maxi Drive/McNamara :roll: :finger:

A 4" lift and 2" body lift will fit 37s with a little bit of cutting.

For more info...have a look at AnthonyP's build up pics. His white RR was on 37" Creepies and will soon be running on 39" Irocs. :cool:

Micka
Yeah but we all know Grimace is a web wheeler :armsup:
yeah :roll: I never wheel anymore :cry:
Top
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

37-38's

Post by MONGREL »

Ok brakeges are you talking axles and CV's mainly or are the rovers weaker than i thought. Im not one to just go flat out, id rather crawl where possible. And 4" suspension lift i am having trouble finding anyone who wants to deal with rangie suspension let alone 4" all i manage to find is 2". I know snake racing have developed one but are still putting it through engineering and will come at cost, >$3500. So if anyone has knows where i can get a tried and tested 4" lift kit at a resonable price, please let me know.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Re: 37-38's

Post by BIg StEvE »

MONGREL wrote:Ok brakeges are you talking axles and CV's mainly or are the rovers weaker than i thought. Im not one to just go flat out, id rather crawl where possible. And 4" suspension lift i am having trouble finding anyone who wants to deal with rangie suspension let alone 4" all i manage to find is 2". I know snake racing have developed one but are still putting it through engineering and will come at cost, >$3500. So if anyone has knows where i can get a tried and tested 4" lift kit at a resonable price, please let me know.
Just dont deal with anyone that says there a rangie specialist! :roll: :roll: Find someone that wants to work for there money and that is keen to get the job done and your set. Although if you collect all your gear its pretty simple change your suspension yourself. ;)
Goodluck and where are u situated?
Top
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

lift kits

Post by MONGREL »

I would have no probs fitting the suspension myself, but who sells 4" lift coils and shocks to suit. I am unsure about what i need to do with hte radius arms, since reading through this forum it looks like i need to bend them (only the rear from what i gather) for this amount of lift why? rotated swiviles? Im in NSW hour and a bit south of sydney. It seems most of the rangie owners are in melbourn area.
Top
Posts: 47
Joined: Mon Apr 18, 2005 6:14 pm
Location: Brisbane

Post by SWAMPRR »

ok iv got a 4inch setup running 37s, firstly it doesnt rub at all but i did cut the guards and did a 2 inch body lift as well as the suspension work.

1. front swivels i rotated the swivel balls - slotted them myself and refitted.

2. up front - i have 2 inch lifted coils with coil spring spacers

3. round back i have 4 inch lifted lovells that shane from 4wd stuff got me - special order wernt very expensive but.

4 i used procomp shockies

5. my rims are offset 3 inches - expensive also because they custom rims made by a sprint car workshop made for me.this was because the first problem i encounted when i fitted them on standard rims was they rubbed like a ba$tard on the front control arms when steering. now makes the wheel track of the vehicle 6inches wider VERY STABLE !

main problem i found with running 37s is the drive line wont like it very much so thats why i read all the forums and opted for a toyota centre conversion, mainly because im an apprentice sparky with limited money and dont have the money for maxidrive stuff and barely could afford the jack axles...did all the work myself also.

now im still in the development stages and ironing all the bugs out but its basically done i get heaps of flex out of the setup...might look at upgrading the front springs to 4"- 6" maybe also..if anyone can suggst a spring that would suit?
You do not have the required permissions to view the files attached to this post.
82 RR with 37" Swampers, toy centres and 4inch suspension lift / 2inch blocks
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Image
its your (and my) best friend :D
Last edited by GRIMACE on Wed Nov 16, 2005 9:13 am, edited 1 time in total.
Top
Posts: 56
Joined: Wed Jan 12, 2005 8:51 pm
Location: BRISBANE

Post by HI JACK »

few shots of my rangie with its new 37 inch creepys
You do not have the required permissions to view the files attached to this post.
GET HAMMERED WITH ROCKHAMMER
website
http://www.rockhammerracing.com/
XRCC Round 1 Event 3
http://www.rockhammerracing.com/movies/xrcc.wmv
Top
Posts: 56
Joined: Wed Jan 12, 2005 8:51 pm
Location: BRISBANE

Post by HI JACK »

this is with a 4" and 2" body using dobinson shocks and springs
will have to do a bit cutting

pm johnz for a price on your shocks and springs if you ask nicely he might
help you put them in :D
You do not have the required permissions to view the files attached to this post.
GET HAMMERED WITH ROCKHAMMER
website
http://www.rockhammerracing.com/
XRCC Round 1 Event 3
http://www.rockhammerracing.com/movies/xrcc.wmv
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Mr Hijack :shock: U got sum cutting to do d00d :armsup:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

AnthonyP wrote:Mr Hijack :shock: U got sum cutting to do d00d :armsup:
Fark cutting...

We'll just take the whole guards off :finger: :twisted:

I see some pipe bending in the near future.

Hello Tube Rangie :armsup:

Micka
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Don't you have to bash the footwells in for 37's? Someone I know had to do that due to the amount of uptravel he has....
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

RangingRover wrote:Don't you have to bash the footwells in for 37's? Someone I know had to do that due to the amount of uptravel he has....
I only had trouble on the front section of the wheel wells, the foot wells were fine although its looking to be a diff story with the 39s :?
Top
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

37's 38's

Post by MONGREL »

Thanks for the info guys,
It sounds fairly simple ill have to get in touch with shane buy some gear and get started :armsup:
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 34 guests