Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spring conversion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 48
Joined: Wed Nov 06, 2002 1:49 pm
Location: Melbourne

spring conversion

Post by pjhsv »

Rocky road sell conversion kits for YJ Wrangler springs to go into zook's, has anyone here done anything like this? Any idea if it's a good swap?
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I believe the YJ spring conversion is effectively running a "chassis extension" type setup with some longer leaf springs in the front in order to achieve more travel in the front end.

I'm not running YJ springs, but i am running Old Man Emu Rear springs at the front with an extended chassis and i love it.

Perhaps this goes part of the way towards answering your question?

Cheers,
DMA Founding Member #1 - Now Retired
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

the YJ springs are the same as hilux fronts.

are you wanting to run their standard kit or shackle reversal?


I've got some laser cut bits of steel to the mod in shackle reversal. but I'm going to hold out until the end of the year to do it.

in my opinion it's a great mod.

I'll post some pics of what sort of flex you can get from it (courtesy of geoff).
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

The biggest problem I can see with the YJs is the scarcity of the springs ..

(second hand ones are going for stupid prices) I have a set of wagoneer springs that I want to try out.. apparently they flex as well as the YJ's but do not suffer from anywhere near the wrap issues ..

Guy
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

you got a set of front waggys ???

if you dont use them i will
www.overkill4x4.com
ph 94766137
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I got two .. for front and rear .. :cool:

$200 .. place in Qld ( dont recall name sorry) and $40 shipping.

Guy
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

as I said the springs are the same as hilux fronts. now these springs are very common.

been looking at doing this mod for well over a year now. just never had the time nor drive to do it.

here are the pics promised.
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

..
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

front travel aint bad for a spook with leaf springs.
:finger:
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

..
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

..
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

..
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

..
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
Posts: 333
Joined: Thu Apr 24, 2003 3:10 pm
Location: Cairns, effenque

Post by mike »

skippy wrote:the YJ springs are the same as hilux fronts.


Damn I wish I'd known that earlier, I'd abandoned this idea due to the scarcity of the springs here. The mod also apparently slightly reduces approach angle.

Do the luxy springs have the same spring rates as well, or are they just the same physical size?
Last edited by mike on Tue Jun 17, 2003 7:09 pm, edited 2 times in total.
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

not sure about spring rates mate. but you could play with the pack to get it how you want it. physically they are the same size or very fawkin close.

the approach angle from the CSC(or sumo) s/r yj kit doesn't reduce the approach angle, as you no longer have a shackle hangle down at the front.
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
Posts: 333
Joined: Thu Apr 24, 2003 3:10 pm
Location: Cairns, effenque

Post by mike »

Been a while since I looked at it. I thought that the bolt on mount at the front actually stuck out a bit further. I also had a bugger of a time getting responses to e-mails from CSC.
Hmmm may have to revisit this idea :cool:
If it's already been thought of...
There has to be a better way...
Top
Posts: 333
Joined: Thu Apr 24, 2003 3:10 pm
Location: Cairns, effenque

Post by mike »

BTW review of the CSC kit here:

http://www.off-road.com/suzuki/reviews/cssuspension.htm

Just tried their web site
http://www.canyonstatecomponents.com/

and it redirects to a search engine
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

I have CJ7 jeep springs in the rear, ome +2 inch sierra rears in the front, both required the mounts to be moved. Flex is pretty good. 6.129 transfer case plus 5.89 diff gears gives it plenty of spring wrap/ axle tramp under load though.
I wouldn't buy anything else from rocky road though....
www.bbmotorsports.com.au
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

spazbot wrote:you got a set of front waggys ???

if you dont use them i will


I have a set of front Waggys here im not using.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I'm pretty sure the csc stuff isn't being built any more. fred has closed up shop.
Ransom note = demand + collage
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

skippy wrote:the YJ springs are the same as hilux fronts.


Length is the same but hilux fronts have an offset center so the axle will be in a different location compared to using YJ springs.

Get some 1" - 1.5" lifted YJ springs from OME...you'll be suprised how cheap they are..
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

how do the widths of hilux, yj and waggy springs compare to zuk ones. Because if they are wider this will involve making spring mounts and spring plates.
Ransom note = demand + collage
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

YJ's are 2.5" wide, so 0.5" wider than zook. This is why people were originally going CJ springs (same width).

Yep, you need to adjust for the width, these kits do it with bolt on mounts and shackles that are different widths at each end.
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Trail Tough have the most popular YJ conversion kit in the US

http://www.trailtough.com/suspension1.htm

You can request no front drop shackle if you want to keep it legal.
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

What width are the wagoneer springs, and whats the spring rate like on them?
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

asian auto parts of arizona have a kit that most people in the states are fabbing up themselves.

it's the shackle reversal kit. the trail tough kit isn't s/r.

http://www.asianautopartsofaz.com/
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Personally, I'd rather stay away from a SR on a SWB vehicle, easier to engineer as well..just my 2cents :)
Top
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

The only thing i have ever seen written about them being bad is because of them causing brake dive...but not having ever driven one i wouldnt be able to comment
CAM
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Also read about them hanging up when trying to reverse of ledges... :?
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

seen a zook with a shackle reversal kit here in canberra looks good standing there but id say the llllong front mount will get caught way before a standard shackle would, and thediff angle was standard i thinks he best get shares in the uni joint factory angles were to extreme, also even with drive shaft spacers he has experienced the shaft slipping out while going over logs & or rocks !
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 86 guests