ok im doin a spring over on lux diffs...
today whils pondering over a beer with my mates about my rear shokie mounts..
i looked at my dads 83 lux.. and it has a sort of lay over shocks as standard!!!!
ok so what year did they change to the "normal" wishy woshy mounts? and would any one by chance have a set laying about? becasue that is exactly what i was going to do with mine!!! i have a standard set of newer moddel ones! if any one wants a swap?
ok i will put a post in wanted aswell! but yeah what modles?
Philby
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear lux shokie mount
Moderators: toaddog, Elmo, DUDELUX
mine has the wishy washy poo ones - 94 model gen III i think.
I think, and it hurts, but i think they came std on the Gen II's and they definately came on the Gen I luxes. definately cannot be gaurenteed.
Seen a few luxes with these. The only problem is that the mount is very low to the ground, the lowest point bar the pumpkin by memory and apparently get knocked about, ending in broken welds and dropping shocks, bending them. Reinforcement could help.
I think, and it hurts, but i think they came std on the Gen II's and they definately came on the Gen I luxes. definately cannot be gaurenteed.
Seen a few luxes with these. The only problem is that the mount is very low to the ground, the lowest point bar the pumpkin by memory and apparently get knocked about, ending in broken welds and dropping shocks, bending them. Reinforcement could help.
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
yeah you're right there mate. Earlier gen 1 luxes' (like Aza's) had shocks mounted in this / \ arrangement. personally, i would keep the diff you have now, as its probably stronger. get some of these
http://www.bigballsoffroad.com/prod360.htm
easier than swapping for an older diff
http://www.bigballsoffroad.com/prod360.htm
easier than swapping for an older diff
indubitably
u dont need to swap the diff..... its just a differnt shaped u bolt plate... similar desisgn to the ones on 75 series.... then the top mounts are just bits of threaded pipe running though the crossmember, then welded... really simple..De-lux wrote:yeah you're right there mate. Earlier gen 1 luxes' (like Aza's) had shocks mounted in this / \ arrangement. personally, i would keep the diff you have now, as its probably stronger. get some of these
http://www.bigballsoffroad.com/prod360.htm
easier than swapping for an older diff
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
$POA
WANTED: hilux crawler transfer gears
yeah im running a ifs rear housing!Slayer wrote:u dont need to swap the diff..... its just a differnt shaped u bolt plate... similar desisgn to the ones on 75 series.... then the top mounts are just bits of threaded pipe running though the crossmember, then welded... really simple..De-lux wrote:yeah you're right there mate. Earlier gen 1 luxes' (like Aza's) had shocks mounted in this / \ arrangement. personally, i would keep the diff you have now, as its probably stronger. get some of these
http://www.bigballsoffroad.com/prod360.htm
easier than swapping for an older diff
and ifs kit in the front!
GOT WIDTH!!!
ok i will get on the phone to the wreckers!
Who is online
Users browsing this forum: No registered users and 1 guest