Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bump stops

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 13
Joined: Tue Oct 18, 2005 6:08 pm

bump stops

Post by sx4wdc »

just another question fellas do i have to trim the bups stops down my self or can i buy low profil ones at any 4wd shop
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

All you need is a hack saw and 12mm spanner... save your money!!
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

Heh, you must have the high tech ones, as all i needed was a steak knife :)
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

bump

Post by klrevo »

ahhahah yeh im with mis3ry, mine were done with bread knife :twisted:

dean
Top
Posts: 397
Joined: Fri Jan 03, 2003 6:21 am
Location: USA

Re: bump

Post by DougH »

Your must have been all old and hardened. I used a cheese spreader.
DougH
95SR: locked front and rear, more coming soon.
Top
Posts: 353
Joined: Sun Jun 27, 2004 9:50 pm
Location: Perth, Western Australia

Contact:
Contact South

Post by South »

Bloody hell, I had to use a friggin chunky saw blade and continue to lubricate it all the time. They were extremely tough!
Top
Posts: 167
Joined: Wed Jul 21, 2004 10:23 pm
Location: Tassie

Post by GREGGO »

I plucked mine and used a hacksaw. I replaced the bolts in mine with high tensile countersunk bolts for better clearance and less noise over the fast stuff. Those bolt heads sure make a racket when they're bouncing off their metal stops!!!

:P :P
Shorty Gen2, lots of stuff and more to come!
Top
Posts: 397
Joined: Fri Jan 03, 2003 6:21 am
Location: USA

Post by DougH »

GREGGO wrote:I plucked mine and used a hacksaw. I replaced the bolts in mine with high tensile countersunk bolts for better clearance and less noise over the fast stuff. Those bolt heads sure make a racket when they're bouncing off their metal stops!!!

:P :P
Do you remember what M# bolts they were? I would like to do that on my truck truck. Too bad that hardware stores here in the states never have things like that on hand.
DougH
95SR: locked front and rear, more coming soon.
Top
Posts: 167
Joined: Wed Jul 21, 2004 10:23 pm
Location: Tassie

Post by GREGGO »

Sorry for being a bit slow Doug. I think the threads were M8 x 1.25 and about 20mm long. I used 5mm cap screws, also called Allen head screws. Hope this helps mate.

:cool: :cool:
Shorty Gen2, lots of stuff and more to come!
Top
Posts: 158
Joined: Fri Jul 16, 2004 11:20 am
Location: Brisbane QLD

Post by muttis3LV6 »

I win i used an angle grinder and conpletly smoked out hte neighbohood looked like i did a massive burn out mmmmmmmmmmm burn rubber burn
Cut down Sierra cab on extended LWB chasie running, Hilux front and Bundy back, with a 4AGZE should be finished about umm soon. A 60 Series work truck and some go fast toys too.
Top
Posts: 12
Joined: Sun Nov 13, 2005 10:58 pm
Location: Brisbane

Post by DirtyPaj »

How much can you trim the bump stops down by? I've heard that you can't trim the lower stops, is this true?

Be great if someone could post some pics so I could get a bit of a clue.

Cheers :)
99NL Paj
Top
Posts: 65
Joined: Sat Aug 21, 2004 7:15 pm
Location: Brisbane

Post by Rubber-Lubber »

DirtyPaj I believe it's 15mm you cut off, and you'll probably need low profile allen key bolts so you're still bumping steel onto rubber rather than steel onto steel. And it's not good to cut down your lower bump stops because they absorb the force of the wheel travelling upwards which is when the weight of the car has to be taken into account. The upper bump stops only need to be able to handle the weight of wheel assembly.
Thanks

Brent n Becc

Our Patrol thread is here: http://www.outerlimits4x4.com/sutra1630148.php#1630148
Top
Posts: 12
Joined: Sun Nov 13, 2005 10:58 pm
Location: Brisbane

Post by DirtyPaj »

Thanks Rubber Lubber, I'll have a go and let you know how I got on :P
99NL Paj
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 20 guests