Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

highmount drum widening

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

highmount drum widening

Post by bru21 »

who has done it, what size pipe was the centre replaced / sleeved with?

how wide is good, is it worth it, how much extra cable, how far has the fairlead have to be moved away from the drum to allow neat spooling.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 256
Joined: Thu Jul 08, 2004 9:16 am
Location: Melbourne

Post by Ossie »

Mine was widened 2 inch's, and reduced to about half the size of standard (all work completed by someone else). I also had a new fairlead made to suit.

All work was complete by Mal Leslie in Vic,

Jason
TIGGR6 - Got the plates but not the car...
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Ossie wrote:Mine was widened 2 inch's, and reduced to about half the size of standard (all work completed by someone else). I also had a new fairlead made to suit.

All work was complete by Mal Leslie in Vic,

Jason
Reducing the diameter of the drum would reduce the line speed wouldn't it? should also improve the torque through better gearing.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Ossie wrote:Mine was widened 2 inch's, and reduced to about half the size of standard (all work completed by someone else). I also had a new fairlead made to suit.

All work was complete by Mal Leslie in Vic,

Jason
Wouldn't reducing the diameter of the drum reduce the line speed?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 256
Joined: Thu Jul 08, 2004 9:16 am
Location: Melbourne

Post by Ossie »

Reducing the diameter also allows you to have up to 80m of synthetic rope which can assist in long stages. The extra cable on the drum compensates for the reduction and balances out the line speed.

I am unsure if the mod was worth it every persion has an opinion, my hi mount stalled on me three times before the mod, I was more interested in torque than line speed for the OBC.

Jason
TIGGR6 - Got the plates but not the car...
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Fester has his done. Dont know whether he did it though. Ossie I can see where you are coming from. Awsome idea.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Ossie wrote:Mine was widened 2 inch's, and reduced to about half the size of standard (all work completed by someone else). I also had a new fairlead made to suit.

All work was complete by Mal Leslie in Vic,

Jason
Any chance you can messure the drum Dia

Tks Matt
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

i have done 4 in the past for people. easy done about $ 400 to do. plus the custom hauze (spelling sorry) $200
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

I dont spoze this mod could be done to a lowmount could it? With all the stuff inside the drum (brake etc).
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

i have looked at doing it just havnt tryed yet. it looks possible
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Whats involved in widening the drum on a High Mount? Ive never realy looked but from my memory there is nothing inside the drum like there is on a low mount so it would just be part the ends of the drum and replace the tube with a longer piece. Am i missing something here? Sounds like something just about anyone with a welder and some good measuring could do in a short time.

I know narrowing a low mount takes about 30 min if you know what your doing.
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

ludacris wrote:Fester has his done. Dont know whether he did it though.
Skip (ex Peter Stirling) did the modifications, and i had an extended fairlead offered to me for $130,i think that was made of billet aluminum
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

just got my highmount from ryano (thanks mate). got a 6 hp motor too. will take the drum out on sunday (before the cherry has even been popped) and have it modded this week.

has anyone got the diameters yet - assuming a 4mm thick sleeve will suffice for a 150mm extension. anyone have tables or calculations.

will weld ears on the back too, plus 3 bearings and thread shaft - who does this eg un harden machine re harden.

is a normal width hause ok if it is away from the winch?

running 11mm plasma.

also bought 6 col hershe solinoids and using 2 in parallel for in single for out. rated at 200A continious.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

brew for ur solidnoid packs got a truck place because u can pick up 100% duty300 to 500 amp solidnoids , thats what i did when making my control box
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

Hey guys can any one give us some idea's of mods to high mount winch for comp work, only just starting out. pics would be great too..
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest