Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V6 into MQ/MK

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 47
Joined: Sat Dec 04, 2004 10:45 am
Location: Hervey Bay Qld

Post by gone fishin »

I'm considering an RB 30 engine transfer into mine, as I want to stay under 3.3L for winch challenge, and am thinking of running the VL auto box and divorsed t/fer, Can you get rock hopper gears for MQ/K divorsed transfers, I was also going to have my gearbox and t/fer nearly touching each other, is there any reason why you have them about 1 foot apart, was it easier to get a shaft to join them this way, I'm looking at doing this to my shorty after the rear diff gets moved back and coil conversion done, this should give me a bit more room. ;)
IV GU Wagon
MQ SWB Racer
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

no you cannot get rock hoppers for MQ/MK tranfers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Screwy_ScrewBall wrote:no you cannot get rock hoppers for MQ/MK tranfers
actually, i think you can. the TX10A calmini kit should be a goer. someone who knows more about MQ junk than me would have to confirm it though. :cool:
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Wendle wrote:
Screwy_ScrewBall wrote:no you cannot get rock hoppers for MQ/MK tranfers
actually, i think you can. the TX10A calmini kit should be a goer. someone who knows more about MQ junk than me would have to confirm it though. :cool:
To all counts of my knowledge, gearing is not available on MQ/MK transfers, trust me ive tried....
rockhoppers are definatly not a goer....

i have contacted marks in the past and they have said if i give them 10,000 and 5 transfers they will make some up playing with the first transfer as a doner....
and it would only end up with a reduction of about 35 percent.....
obviously i didnt bother
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

http://www.xterraparts.com/Merchant2/me ... creen=PROD

this kit is made for a nissan TX-10A t/case, which i think is the same animal as the MQ uses.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MQ married transfer is T130A
MQ divorsed transfer is T100
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Screwy_ScrewBall wrote:MQ married transfer is T130A
MQ divorsed transfer is T100
oh well. put an atlas in it. :lol:
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Wendle wrote:http://www.xterraparts.com/Merchant2/me ... creen=PROD

this kit is made for a nissan TX-10A t/case, which i think is the same animal as the MQ uses.
Screwy_ScrewBall wrote:MQ married transfer is T130A
MQ divorsed transfer is T100

I wonder how hard it would be to addapt the MQ gearbox to take a TX-10A transfer.....

:roll:


If only I had a TX-10A layin around I'd give it a go :armsup:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests