Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Recovery Hook
Recovery Hook
I wan't to bolt a recovery hook of some sort to the front of my zook, but need a few ideas of the best way to attack the job. Its a 92 sierra with 2" BL, 31's with 2" lifted springs. It also has a poxy alloy bullbar which seems to be in the way. Any suggestions???
Hook
Bolt it sideways to the outside of the chassis rail. Use grade 8 bolts and fit heavy tube between the rails (around the bolts) to prevent the rail from collapsing as you tension the bolts. get a hook with a spring retainer on it that prevents the cable/rope from slipping off. Ideally fit a hook on each side of your truck.
Happiness is life in low range!
I used one of the bar mount holes, drilled out to suit hook bolt, with a crush sleeve in the rail...the rear bolt has a plate behind it..a bit of trimming on the chassis rail was needed...there is a post with more details somewhere
christover
christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Twisted by Design
heres what I did
look on the passenger side chassis rail
look on the passenger side chassis rail
You do not have the required permissions to view the files attached to this post.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Ha I was about to say bubs, that picture is as clear as hell! It was like one of those where's wally games.
Looks good on top, easy to get to if your a mud type person. Nothing worse then lying on the bonnet reaching over to find a hook deep in the mud.
Looks good on top, easy to get to if your a mud type person. Nothing worse then lying on the bonnet reaching over to find a hook deep in the mud.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Who is online
Users browsing this forum: No registered users and 7 guests