Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear bar help needed

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Rear bar help needed

Post by swbpatrol »

Gooday all
I really need some confirmations on some measurements if anyone can help. Im builing myself a single tube rear bar (unlike cheezy's) with swing away carrier and have got some measurements and as many people have built there own they might be able to tell me im full of s*"t or correct. Below is a quick diagram i typed up could not scanner going to scan hand written complete one. Any help comments would be good
You do not have the required permissions to view the files attached to this post.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Rear bar help needed

Post by bogged »

swbpatrol wrote:Gooday all
I really need some confirmations on some measurements if anyone can help. Im builing myself a single tube rear bar (unlike cheezy's) with swing away carrier and have got some measurements and as many people have built there own they might be able to tell me im full of s*"t or correct. Below is a quick diagram i typed up could not scanner going to scan hand written complete one. Any help comments would be good
http://equip4.co.nz/rear%20bumper.htm
This any help?
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

yeah its a start mate thanks heaps
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Be careful with the mountings to the chassis - they need to be an upside down L shape to clear the standard recovery points at the rear.

Have to get mine fixed to make it straigt. Gonna try and do them at home tomorrow but may not have enough grunt with the little grinder as my rear bar is all about 5mm thick.

It's gonna be strong enough for a wheel carrier :D
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

any pics of yours??? Measuremnts???? Also what kinda pivot are u gonna use for your swing away carrier??
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

someone must have some measurements. Anyone????
Top
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

1153 looks good. I made mine at 1150 and its very hard to get on.

Bend all your tube, make your mounting brackets and then use your vehicle as a welding jig (disconnect battery first), then you know for sure it will fit and have the required clearances.

If you want PM me an email address and I will send you "dwg" files of my design which will open in auto cad.

Cheers MEX
SWB MAVERICK
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

when i made my rear bar, we mounted the brackets the the chassis rails, then tacked the bar into place, then my father Welded it all up, what we realiased, is when fitting brackets the the chassis, it may pay to put a 1mm packer or so on either side, so after welding its far easier to get the bar back on,
You do not have the required permissions to view the files attached to this post.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

swbpatrol wrote:someone must have some measurements. Anyone????
why not take your standard bar off and measure that?
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Hear is my modified ARB bar with custom wheel carrier.

Image
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 45 guests