Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats wrong with my 1.3 carby?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 16
Joined: Mon Aug 16, 2004 1:15 pm
Location: Sylvania

Whats wrong with my 1.3 carby?

Post by Meteor »

After a trip to stockton beach on about the hottest day of the year the other day the sierra has been has been idling almost 1000rpm higher than usual (up to 2700 at the lights :? ). The temp has been sitting around 2 needle widths higher as well. Raditator is near new, idle is not related to having lights on etc. so nothing in the search....
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

sand in the carbi, take it off and blow everything out.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 16
Joined: Mon Aug 16, 2004 1:15 pm
Location: Sylvania

Post by Meteor »

no sand, just found the screw to adjust the idle has half it's thread missing... bugger
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

my idle starts normal.. but after like a 2minute drive it sits really high!!

could that be the idle screw to?
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Crawford wrote:my idle starts normal.. but after like a 2minute drive it sits really high!!

could that be the idle screw to?
sounds like auto choke may be sticking on....often caused by too low water level, or blockage in pipes that feed the auto choke.
running hotter suggests a water flow issue, which can affect auto choke.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

well my car uses like no water not sure if thats a good or bad thing...

did a 800km drive once and the water barely went down at all

so could it be a blockage? and how could i find out

cheers
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

The pipes running in and out of the auto choke should be warm to hot when car has reached running temp.
If one pipe is cold, it is not flowing.
Pull one end of and blow the crud out usually works.
You can also see the mechanism slowly move up as car warms.
worth a look into.

christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Re: Whats wrong with my 1.3 carby?

Post by christover1 »

Meteor wrote:After a trip to stockton beach on about the hottest day of the year the other day the sierra has been has been idling almost 1000rpm higher than usual (up to 2700 at the lights :? ). The temp has been sitting around 2 needle widths higher as well. Raditator is near new, idle is not related to having lights on etc. so nothing in the search....
check your choke, too, water can get air locks or crud in them, causing ckhoke to stay on, which in turn keeps the idle high, cos it thinks it cold

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

full of the nuggets of wisdom christover, as always :)
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

OldGold wrote:full of the nuggets of wisdom christover, as always :)
:oops: :oops:
my nuggets have often been unwise, judging by past women :D
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 16
Joined: Mon Aug 16, 2004 1:15 pm
Location: Sylvania

Post by Meteor »

Officially the wax plug that moves the auto choke has stopped working, will know if it's a water flow issue tomorrow. Couldn't go on driving it with the idle getting up around 3,500, brakes would be f$cked in a week.... Having the thing start up like an old radial engine did sound kinda cool though. ;)
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests