Hi.
My Sierra is currently having an vitara 1.6 16v put in however my snorkel is on the opposite side to the new air intake. What should I do. I could try and run some flexy pipe accross the engine bay to the snorkel but I'm concerned that the engine will struggle to suck air in through such a long straw. Anyone elso done this? Does it make much of a difference havng it on the opposite side? Does anyone make a plastic snorkel that fits the left side of a Sierra?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Right side snorkel and a 1.6 16v?
There's no off the shelf LHS snork for a Sierra, that I know of.
I have a 16v too and used to have a snorkel on it, it was a custom job. Get some 2.5" mandrel bends and some exhaust tube and make one up. Most snork heads are 3" though so take it into an exhaust shop and have them swage out the end to 3".
I have a 16v too and used to have a snorkel on it, it was a custom job. Get some 2.5" mandrel bends and some exhaust tube and make one up. Most snork heads are 3" though so take it into an exhaust shop and have them swage out the end to 3".
Who is online
Users browsing this forum: No registered users and 0 guests