Hi
I know this is a 4WD forum, but anyone here done a swap on the 2WD 2.2L Petrol Hilux motor for a 1G-GTE 2.0L 6cyl turbo? I have a mate who is about to start this conversion, anything he should know before he rips
out the old 4cyl.?
Cheers,
Bart
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1G-GTE turbo into Hilux Q's
Moderators: toaddog, Elmo, DUDELUX
ok these guys in QLD have done this exact conversion, so it might be worth talking to them
http://www.japparts.com.au/projects/index.htm
also the toymods forums will prolly be able to give you tonnes of info as they engoy sticking these engine sinto celicas and stuff.
www.toymods.org.au
http://www.japparts.com.au/projects/index.htm
also the toymods forums will prolly be able to give you tonnes of info as they engoy sticking these engine sinto celicas and stuff.
www.toymods.org.au
www.overkill4x4.com
ph 94766137
ph 94766137
spazbot wrote:ok these guys in QLD have done this exact conversion, so it might be worth talking to them
http://www.japparts.com.au/projects/index.htm
also the toymods forums will prolly be able to give you tonnes of info as they enjoy sticking these engine's into celicas and stuff.
www.toymods.org.au
I was actually just looking on www.toymods.org.au lots of good info there.
I'll just check japparts.com.au now. My mate will be cheering.
Thanks for your help dude.
Bart
Last edited by Toyo Truck on Mon Jun 30, 2003 11:26 am, edited 1 time in total.
cplux wrote:just out of interest is the 2.2l 4cyl your mate has a 4y-c or 4y-e motor???
Not sure, I'll find out for you today, I think 4y-c.
N.A.M. - A few Q's
Was it a worked 1G-GTE or stock? Was it in an 88 model lux?
Did it snap 2nd's? Did it snap 3rd's?
Accelleration-wise, what would you compare it too?
Cheers,
Bart
Nice one, sounds almost identical to my mates one.
"Snapping" gears refers to when you quickly and agressively change
through the gears, ie from 1st to 2nd, without allowing the revs to drop much, then dumping the clutch with the resultant revs to make the wheels light up and produce a wonderful "chirping" noise.
Slightly worked 180SX, that's more than enough power for starters. Hes
gonna Intercool it, High-Flo it, Exhaust it and Motec it. Should be a pretty
quick little low-lux.
Bart
"Snapping" gears refers to when you quickly and agressively change
through the gears, ie from 1st to 2nd, without allowing the revs to drop much, then dumping the clutch with the resultant revs to make the wheels light up and produce a wonderful "chirping" noise.
Slightly worked 180SX, that's more than enough power for starters. Hes
gonna Intercool it, High-Flo it, Exhaust it and Motec it. Should be a pretty
quick little low-lux.
Bart
Allright, update on the conversion. It was actually a 3Y-C to start with.
Motor is now bolted into the bay, looking sweet.
There is a small problem, the sump and pick up had to be removed
for it to fit.
The W58 Gbox apparently bolted straight into the
crossmember and the passenger engine mount also bolted up,
but drivers needed some basic modification to fit.
So my mate will obviously need to get a tailshaft made to suit,
but does anyone know a good way around the sump and oil pickup
problem??
Cheers,
Bart
Motor is now bolted into the bay, looking sweet.
There is a small problem, the sump and pick up had to be removed
for it to fit.
The W58 Gbox apparently bolted straight into the
crossmember and the passenger engine mount also bolted up,
but drivers needed some basic modification to fit.
So my mate will obviously need to get a tailshaft made to suit,
but does anyone know a good way around the sump and oil pickup
problem??
Cheers,
Bart
Toyo Truck wrote:Allright, update on the conversion. It was actually a 3Y-C to start with.
There is a small problem, the sump and pick up had to be removed
for it to fit.
but does anyone know a good way around the sump and oil pickup
problem??
Cheers,
Bart
Can you Cut the deep part of the sump off and weld it back on again where it wont hit any thing.
Move the oil pickup into the bottom of the sump again by extending the pipe conecting it.
Re: 1G-GTE turbo into Hilux Q's
ive nearly finished fitting a 1ggte to my 86 4runner which i bought of a guy in melbourne who had it in his 85 single cab lux.
if ur fitting it to an IFS hilux you will have to change engine mounts (bring them back 70mm) and sump to make it fit (see my pics) along with all the usual stuff involved in engine swaps. To fit it to a solid axle hilux all you need to do is slighty modify two left hand 3 or 4y engine mounts to fit. The 1ggte bell housing will fit any W series box so generally any 2.0 or 2.2 Y engine will have a G52 bolted to it. As far as it goes its a good conversion for the amount of power you will get from the motor.
if ur fitting it to an IFS hilux you will have to change engine mounts (bring them back 70mm) and sump to make it fit (see my pics) along with all the usual stuff involved in engine swaps. To fit it to a solid axle hilux all you need to do is slighty modify two left hand 3 or 4y engine mounts to fit. The 1ggte bell housing will fit any W series box so generally any 2.0 or 2.2 Y engine will have a G52 bolted to it. As far as it goes its a good conversion for the amount of power you will get from the motor.
Who is online
Users browsing this forum: No registered users and 83 guests