Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Okay...more weird thinking :)

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Okay...more weird thinking :)

Post by Ferwoaza »

Man...the things that pop into my head :) :)

Okay..the Daihatsu Applause has the same engine (HD-E 1.6L) as the Feroza, only difference is the cam.

So...the gearbox in an applause should mate up to a Feroza engine. If the applause was rear wheel drive, it would be perfect to set up a divorced xfer case using a short intermediate driveshaft...

Problem is, I think they are all front wheel drive. Now..never having looked under a frontwheel drive vehicle...how does the driveshaft come out of the gearbox?? Could it be adapted to go backwards to an xfercase?

If this was possible...could be a relatively easy solution to get lower xfercase gears??
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Applauses are FWD. The gearbox and diff are all one assembly and the motor is mounted east-west, instead of north -south as the Feroza's are.

So if you put the Applause gearbox assy onto a Feroza you'd end up with the drive shafts pointing north-south under the Feroza (could be handy for parking- would be able to drive sideways! :lol: )
David
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Shows you how much I know!!

Thanks for the info dude :)
Top
Posts: 2001
Joined: Wed Nov 20, 2002 9:23 am
Location: Melbourne

Post by *BESTY* »

Muzza, go with your original idea !

The concept of the Rocky with the V8, Toyota running gear etc.. sounded excellent.

Why are you changing your mind ??
[color=orange] BESTY [/color]




GU4800
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

No, not changing my mind, just thinking through stuff. Someone asked me last night when am I SAS'ing the Feroza, and the main reason I won't SAS it is because there is no point without lower xfcase gearing options as well..and I don't want to turn the Feroza into a full blown project :)

I've got 2 trains of thought/planning happening at the moment..

1. Buy a Rocky. Sell drivetrain, buy engine + hilux gear. Which engine? Unsure as yet.

2. Buy wrecker Rocky (chassis/body, nothing else) and cheap running hilux and swap engine + drivetrain + everything needed to Rocky.

Also looks like the LWB Rocky is the go, removeable rear roof, and good option to go dual case.

I'd love to try running a slush box. Would make offroad crawling so much easier imho. But don't know what cheap engine/gearbox/toy xfer case option I can do :|

Anyway...bit of luck and I'll have work straight away, most likely will pick up cheap Rocky and start cutting a bit ;)
Top
Posts: 2001
Joined: Wed Nov 20, 2002 9:23 am
Location: Melbourne

Post by *BESTY* »

Well, as you're not sure of what engine to go for.......I recommend the Holden V6.

I got a wrecked Hilux (all the gear) V6 conversion already done, so it came with the bell houosing and everything for 2K. Absolute bargain if you can find one already done....then swap everything and get it engineered !!
[color=orange] BESTY [/color]




GU4800
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

You scored on that one mate :)

How does the commo V6 go offroad? Can it get low enough in the revs department or do you need to give it some?

How much is the conversion kit if I can't track down a cheap already done lux (doubt I could..)?
Top
Posts: 2001
Joined: Wed Nov 20, 2002 9:23 am
Location: Melbourne

Post by *BESTY* »

It goes really well off-road, matches nicely to the Hilux gearing, so ya don't need to give it too much right foot........BUT





It sounds really really good when you do put your foot down !! :twisted:

As for the conversion, you'll need to check Marks 4WD Adapters, but I think the price is around the $1200 mark ??

I reckon you'd have more luck finding a wrecked Hilux with conversion already done for a lot cheaper....just go to the auctions ;)
[color=orange] BESTY [/color]




GU4800
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Cool, I didn't think there were that many conversions out there? Hmm..new to QLD..will have to dig around and find out where the auctions are at and go have a squiz.

Kinda like the idea of dual cases as well :twisted:

SPOA and some healthy guard cutting, should be able to keep it fairly low and get 35s on it which would be my initial target. Rocky engine bay should be bigger than a feroza's as well, easier fitting etc..one thing would be the axle width. Rocky is the same as Feroza ie ~58" and hilux is 55", nothing some backspaced rims can't fix tho. Stock Rocky springs should flex very nicely in SPOA (seen zooks running them like that) and if worse comes to worse, got the yota springs to play with..
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Murray, you say your in QLD now? There was a thread somewhere about any SPOA conversion being illegal in QLD..... :?
David
Top
Posts: 2001
Joined: Wed Nov 20, 2002 9:23 am
Location: Melbourne

Post by *BESTY* »

David's right....unless your vehicle came out with it as an option....NO GO !

OR

Are you making a trailer 4WD ??

Why don't you consider the Bundy Diffs.......make it coils all round....don't have to worry 'bout leafs anymore !!

Go a 5-link front, 3-link rear......8 inch coils.....3 inch body lift.....42 Swampers :D :D
[color=orange] BESTY [/color]




GU4800
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

Guys...I still have a NSW license :D
Top
Posts: 2001
Joined: Wed Nov 20, 2002 9:23 am
Location: Melbourne

Post by *BESTY* »

Ferwoaza wrote:Guys...I still have a NSW license :D


Yeah.....but do you have a NSW address ??
[color=orange] BESTY [/color]




GU4800
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

The address on my license is my parents house :D :cool:
Top
Posts: 39
Joined: Thu Jan 02, 2003 8:24 am
Location: Melbourne

Post by RockyMan »

Applause came in 4wd version in Europe so there must be someting in it.

Rockys were modified also in Europe with V6 BMW engines by some company in Italy .
1993 Daihatsu Rocky Sportswagon.

Melbourne VICTORIA
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

RockyMan wrote:Applause came in 4wd version in Europe so there must be someting in it.



The engine would still be in an east west configuration. All they do is run a small tranfer case with a drive shaft to the rear diff out the side of the normal FWD gearbox.

I had a 4WD Laser turbo and that is how it was set up.
David
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 27 guests