Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dying Feroza

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 143
Joined: Sat Jul 16, 2005 11:18 am
Location: Brisbane Bayside

Dying Feroza

Post by drewe »

Man, this car is giving me the @$#@$@#$#@$#'s!

On Christmas day, was driving and when I put the clutch in it just stalled..... Just happened like that!

Now, it idles when started at about 600 (if that) and missing - seems ok under accelleration but if you lift off it misfires and if you lift right off it just stalls completely.....

Checked the plugs - they are all black with carbon (ie, running way rich) - pulled the air filter off was slightly better but not much (I run a pod anyway)!

The fourth plug (one closest to cabin) also has oil on it :(.

Getting a new ignition coil (the current one looks original - 15 years and 208000 KM's old! - resistance is twice what the book says) and oxy sensor (getting a universal - one for Daihatsu quites $178!!!!!).

The lead from the head to the EFI unit weas clogged with oil - cleaned it but hasn't helped.....

Anyone think of anything else? Only got the head redone, shaved, etc, with belts, leads, dizzy cap, timing belt, etx about 5000K's ago!

:(
:? :x :cry:
Posts: 143
Joined: Sat Jul 16, 2005 11:18 am
Location: Brisbane Bayside

Post by drewe »

Found it - the problem seemed to happen when I took a gutter a bit fast... .First inspection looked ok, I just did a 'feel' along all the lines - one of the vacuum lines had dropped off and the connector went missing......

So one on, one off, car runs like @#$@#$#@#@

All shops shut so found a 'long' one and cut a but off to get me going - all great now :D

All I need to do is buy 10 metres of the stuff and replace all the half broken ones and It should be good.....

@#$@# Car
Posts: 238
Joined: Wed Apr 27, 2005 12:11 am
Location: Oz

Post by senergy »

good to hear that it was only something easy and cheap.
Ive been slowly going through and replacing all my hoses with new ones too.
Posts: 143
Joined: Sat Jul 16, 2005 11:18 am
Location: Brisbane Bayside

Post by drewe »

The line is only $4 a meter at Autobahn - I just purchased their last 5 Metres and will be back for more once I am done with that - all the lines in mine are oldm cracked and dying - I am sure there are small gains for the $20 outlay I can make!
Posts: 236
Joined: Tue Aug 09, 2005 8:24 pm
Location: Brisbane

Post by Rb25sil80 »

Unfortunately I dont think your bodgi vacuum line caused the oil in number 4 :(

I just went through the oil on plugs problem. Pockets aRe much lighter these days !
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest