It seems as though the radiator in the old girl is past it's prime! Temps were getting up there even though full of coolant. Had a closer look on the weekend and it seems as though the filaments (or whatever they're called!) are starting to rot.
Any suggestions for a replacement? Will be using the vehicle for offroad racing at some point in the future so if I'm going to replace things, I'll be upgrading things with that in mind.
Cheers
Stu
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Radiator Replacement
Moderator: Micka
Radiator Replacement
2003 4.7lt V8 Jeep Grand Cherokee Laredo
1981 3.5ltr 2dr Range Rover
------------------------------------------
Welcome to Australia - the nanny state!
1981 3.5ltr 2dr Range Rover
------------------------------------------
Welcome to Australia - the nanny state!
The most efficient radiator is an aluminium one. As with all things good they cost $$$. Not sure of any dealers in QLD but andrew richmond has them http://www.lrautomotive.com.au/home.html
There is also a larger core option if going for a recore of your existing radiator.
There is also a larger core option if going for a recore of your existing radiator.
Warn - Dont leave home without it
I've just fitted a EF falcon radiator in my rangie, still sorting some "permanent" tmounting issues, and the extra outlet But runs cool. Picked mine up for $120 from a wreckers, with the bonus of easily mounting EF/EL thermo's in the near future. Once I've sorted it all I'll get some pics up.
Thonger
Stu,
I have a 3 core Natrad 940 ? in my 92 3.9.
This was a warranty replacement when I bought the car second hand.
I hit the roof when I saw it, as I assumed that it was inferior to my standard 4 core. I called Natrad and an engineer explained that it was superior in every way .
I was driving up Browns? Mountain about 2000 Meters in 10 Kilometers from Bega to the Monaro yesterday in an outside temp of 46C, and the gauge did not move. I have low ranged in 49c without the gauge moving.
I am prettyy sure that the Natrad core will fit your small end tanks. I reckon this is the cheapest and best solution as it is about 15% better than a 3.9 four core and should cost less than $400.
Regard sPhilip A
I have a 3 core Natrad 940 ? in my 92 3.9.
This was a warranty replacement when I bought the car second hand.
I hit the roof when I saw it, as I assumed that it was inferior to my standard 4 core. I called Natrad and an engineer explained that it was superior in every way .
I was driving up Browns? Mountain about 2000 Meters in 10 Kilometers from Bega to the Monaro yesterday in an outside temp of 46C, and the gauge did not move. I have low ranged in 49c without the gauge moving.
I am prettyy sure that the Natrad core will fit your small end tanks. I reckon this is the cheapest and best solution as it is about 15% better than a 3.9 four core and should cost less than $400.
Regard sPhilip A
less than $400 for a new unit that fits is a bargain - extremely hard to get 3.9 radiators for a resonable price have heard of people importing them for less than you buy them here genuinePhilip A wrote:Stu,
I have a 3 core Natrad 940 ? in my 92 3.9.
This was a warranty replacement when I bought the car second hand.
I hit the roof when I saw it, as I assumed that it was inferior to my standard 4 core. I called Natrad and an engineer explained that it was superior in every way .
I was driving up Browns? Mountain about 2000 Meters in 10 Kilometers from Bega to the Monaro yesterday in an outside temp of 46C, and the gauge did not move. I have low ranged in 49c without the gauge moving.
I am prettyy sure that the Natrad core will fit your small end tanks. I reckon this is the cheapest and best solution as it is about 15% better than a 3.9 four core and should cost less than $400.
Regard sPhilip A
Tom
Who is online
Users browsing this forum: No registered users and 0 guests