Rocky body lift bolt specs...

[ayashko]

Hi all. Got some nylon rod @60mm dia. and will prob get around to doing the body lift (2" lift) this w/e. Q is, it would be good to know the length (and size) of bolts so i can get them prior to pulling everything apart on Sunday... bit hard to drive down to the local bolt bloke with nothing holding the top to the bottom

So - i know a few guys have lifted their Rockys, but do you remember the bolt lengths??

(Sorry, did a search, but couldn't find any posts with particulars...)

Thanks

[Spartacus]

i think i reused the middle bolts for the front and rear and bought six
150mm fine thread high tensile, 20 nuts and a bottle of locktight

[HotFourOk]

Let us know how you go with it mate... I'm interested in body lifting mine also.. yours is an F78 isnt it? If so, will be a touch different to the others as it has IFS and coil rear.

[The Rocky]

all i did mate was take out one side of the bolts and took them to the bolt place and got them 2 inch longer x 2 for both side s . but its a bit hard if u only have one car i suppose