Can I do a suspension lift on my new toyota turbo diesel (IFS)?
If so, how far can I safely go.....What breed should I be looking at
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tech talk
Moderators: toaddog, Elmo, DUDELUX
OK my first comment is "YOU SUCK"
Now before i get hammered for picking on a NEWBIE have a look where he lives!
MMMMmm about a 30 minute drive to LCMP!!!!!!!!!!! (Bastard
) 
Sorry i just think your pretty lucky thats all!
Anyway back on the subject!
There are a few kits available but are quite expensive!
Most of the Kits usually offer lifts in 2 inch progressions 2", 4", 6".
You will find that it a lot of people will suggest a solid axle swap, but since its a NEW rig that is not a very viable option!
If you just want to lift it slightly to increase your ground clearnce then don't get to carried away with the height, i would only go 2 inches other wise it will just get to top heavy!
Also if it brand new i would be very careful of the warrenty! Toyota would do a after market suspensin kit for it but NOT a LIFT KIT!!!!
Now before i get hammered for picking on a NEWBIE have a look where he lives!
MMMMmm about a 30 minute drive to LCMP!!!!!!!!!!! (Bastard
)
Sorry i just think your pretty lucky thats all!
Anyway back on the subject!
There are a few kits available but are quite expensive!
Most of the Kits usually offer lifts in 2 inch progressions 2", 4", 6".
You will find that it a lot of people will suggest a solid axle swap, but since its a NEW rig that is not a very viable option!
If you just want to lift it slightly to increase your ground clearnce then don't get to carried away with the height, i would only go 2 inches other wise it will just get to top heavy!
Also if it brand new i would be very careful of the warrenty! Toyota would do a after market suspensin kit for it but NOT a LIFT KIT!!!!
You can always do a 1 or 2 inch body lift and chuck some bigger tyres under her.
Body lifts are prettty straight foward some people like em, some people dont.
Im of the opinion that if done well and not too high (more than 2 inches is a no no) then they are fine.
Body lifts are prettty straight foward some people like em, some people dont.
Im of the opinion that if done well and not too high (more than 2 inches is a no no) then they are fine.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Re Lift on My Toyota.
Who is online
Users browsing this forum: No registered users and 118 guests