Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

scraps? 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3
Joined: Sun Aug 28, 2005 1:53 am
Location: sydney

scraps? 80 series

Post by agusthefy »

do anyone runs 35 x 12,5 x 15 on 3¨ lift on 80 series? and if it scraps?
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

I run 2inch lifted springs with 30mm coil spacers on a 91 GXL with 35 inch MTR"s and they just scrape on the inside of the flares.
Top
Posts: 168
Joined: Sun Apr 18, 2004 8:25 pm
Location: Melbourne

Contact:
Contact buckingfox

Post by buckingfox »

FYI I run 35x12.5X16 Bias Claws on a 2" spring lift (no spacers or anything else) and have yet to have issues with rubbing. Having said that I did have to go to ROH trak II rims because the std GXL rims didn't have enough offset.

Hope that helps.
Have you ever wondered how you get triangles from a cow? You need butter, milk & cheese and an equilateral chainsaw!
Top
Posts: 3
Joined: Sun Aug 28, 2005 1:53 am
Location: sydney

Post by agusthefy »

thanks, mate that helps me a lot
Top
Posts: 109
Joined: Sun May 22, 2005 1:56 am
Contact:
Contact alchemist

Post by alchemist »

My 35 inch mudzillas used to _just_ rub with 3 inch lift on my 80 series under the front wheel arches (with no sway bars connected)

And as the other bloke said, you will need rims with the correct offset to stop them rubbing on the inside rear panel above the chassis rail.
06 Hilux SR5 D4D
- www.newhilux.net
Top
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

Post by guzzla »

i believe all roh rims will be supplied to offer maximum offset allowed over standard. ;)
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
Top
Posts: 138
Joined: Mon Mar 15, 2004 9:47 pm
Location: Gladstone

Contact:
Contact Hardcorr

Post by Hardcorr »

I've got 33x12.5x16 BFG Muds on Factory 16x8 Alloys with a 2" spring lift and 1" spacers and I have had to trim the rear mudflaps (GXL) to stop them touching on full travel.
They have scrubbed against the gaurds when the car was loaded for a trip and driven a little too harshly as they sit just short of level with the flares.
I doubt I would be able to fit 35's under it without further mods.

Cheers
Corry
'98 80 4.5/Auto 40th Anniversary - Tour
'92 80 6.5V8TD/Auto/37's - Toy
VE HSV Senator 6.2/Auto - Play
Top
Posts: 64
Joined: Thu May 12, 2005 7:59 pm
Location: Hobart Tasmania

Post by timbocruise »

mine fit ace with the lift i have, where fine with three inch lift
60 SERIES CRUISER
NO LIFT!
31s
stock as a rock
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

guzzla wrote:i believe all roh rims will be supplied to offer maximum offset allowed over standard. ;)
The trac 2 16x8 rims sit an inch further out than the std gxl 16x8....fills the flare up and stops the inside rubbing. These rims are 60 series offset.
Andrew
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

please correct me if im wrong but the tyre places a believe list them as a -28? i run them on the lux with 15.5'' wide tyes no wheel spacers they run really well :armsup:
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 3
Joined: Sun Aug 28, 2005 1:53 am
Location: sydney

Post by agusthefy »

thanks fellas, just fit 35 x 12,5 and scraps a little bit on the rear mudflaps.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

thats a sweet looking 80 series :cool:
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

Old Yella wrote:thats a sweet looking 80 series :cool:
Another pic of it :cool:
Image
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

here's a pic of my 80 :D
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 145 guests