Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Temp gauge ohms range

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Temp gauge ohms range

Post by Rangie Thing »

Hi to all i was just woundering what ohms range that a 74 range rover use's and also do range rover temp senor have three screws to hold them in and are not the screw in type Thanks.
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

The three screw thing on top of the manifold is a sensor which turns on a light to indicate that you have left the choke on. Nothing to do with the gauge.
The temp gauge sensor is a screw in sensor at the front of the manifold next to the thermostat housing.
Sorry do not know Ohms.
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

ummm... my choke light is actuated by a little switch thingy attached to the choke cable just behind the dash...

i am pretty sure that the triangular switch is for the thermo fans in front of the radiator...
You do not have the required permissions to view the files attached to this post.
Posts: 128
Joined: Mon Jan 19, 2004 11:51 pm
Location: Near the Prom vic

Post by peter r »

G`day , sender is as Philip describes . Can`t help with the omh range .

Both Philip and Craig are correct about the other sender .

Philips for a manual .

Craigs for an auto .

All the best , peter .
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest