My old 4y-e petrol 4 runners (1987) radiator is a bit sad looking with folded and corroded fins and she's getting a bit hot on the beach. Time for a new one I reckon
The petrol one is a little 2 core thing so if its coming out abyway I'd like to beef up the system What will fit and how much will it be I don't want to just recore my old one cause its and expensive exercise to not gain any improvement So I can;
*Put one from a 2.4 diesel in, they're 3 core so a decent improvement. I've been told they fit but are they taller? I have no lift so a longer one COULD be prone to damage. Do they actually fit??? Will I need to swap hoses or modify the radiator???
*Get a custom one or alloy etc. How much are people paying for these... say 3 core from desert coolers or custom made or something. Or is there a place that makes them aftermarket ready to go, you can get just about anything for a hilux
Other ideas???
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bigger radiator - hilux/ 4runner
Moderators: toaddog, Elmo, DUDELUX
Depending how much room is in the frame , thickness , you could recore with a 3 core one. I replaced a 2 core with a 4 core and it just fit in the frame.
Go to a local radiator place to see what they can do for you.
Try to get one which is about 18 fins per square inch, easier to get mud and crap out of . Also get the "S" type fins for better preformance when cooling.
Go to a local radiator place to see what they can do for you.
Try to get one which is about 18 fins per square inch, easier to get mud and crap out of . Also get the "S" type fins for better preformance when cooling.
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Who is online
Users browsing this forum: No registered users and 2 guests