Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

temp gauge on hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 6
Joined: Wed Sep 08, 2004 5:23 pm

temp gauge on hilux

Post by toyota_freak »

hey all,
i have a 1991 hilux (petrol) and my temp gauge in the dash shit itself costing me 2 grand to fix as my engine overheated.

i need to buy a new aftermarket temp gauge and was wondering if my model hilux has a mechanical one or electrical one????

how hard are they to fit???

thanx for any help.
Posts: 707
Joined: Fri Jul 22, 2005 10:03 pm
Location: ipswich

Post by jugger »

dosent matter . it will be electrical garunteed . just go and buy a speco , or autometer mecanical it will bolt strat in where the ols sender was . i think the mecanical one is better option . but thats my opinon.

jamie
ya got2 b tuff if u gunna b dumb!!
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Yep go the mechanical for sure. Will always be accurate. Almost come to grieve on more than 1 occasion due to the :bad-words: temp setup.
Posts: 1
Joined: Fri Jul 01, 2005 6:54 pm
Location: SOR Perth WA

Post by Toylux »

Just a tip here... my Hilux lost the water (with the missus driving) and apparently when that happens it sticks at the last temperature so the sparkys tell me. (I had the sender and guage tested). She brought it home with a bit of a rattle. A $5000 dollar rattle. You can buy and install an alarm that tells you when your water drops instead. I'm trying to find one now.

Cheers, Steve.
Posts: 6
Joined: Wed Sep 08, 2004 5:23 pm

Post by toyota_freak »

hey thanx for the replies guys.
where abouts is the sender on my engine??
if i got a car electrics place to do it, how much should they ask seeing its a fairly esy job??

thanx
Posts: 27
Joined: Fri Aug 12, 2005 7:36 pm

Post by sarg »

This is the type of thing that you (we) should all be using

http://www.enginesaver.com.au/
Posts: 707
Joined: Fri Jul 22, 2005 10:03 pm
Location: ipswich

Post by jugger »

genrally its at the fronyt near the thermostat housing or water neck . on mine i had to positions to chosse from . and the other guys are right get a low water allarm think it mite cost all of 100 dollars at a leccey shop but when ur talkn desiel rebuild its worth it .
ya got2 b tuff if u gunna b dumb!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest